ADL5534 20 MHz TO 500 MHz IF Amplifier

The ADL5534 contains two broadband, fixed-gain, linear amplifiers and operates at frequencies up to 500 MHz. The device can be used in a wide variety of equipment, including cellular, satellite, broadband, and instrumentation equipment.

The ADL5534 has a fixed gain of 20 dB, which is stable over frequency, temperature, power supply, and from device-to-device. The amplifiers are single-ended and internally matched to 50 Ω. Only input/output ac-coupling capacitors, power supply decoupling capacitors, and an external bias inductor are required for operation of each amplifier

The ADL5534 is fabricated on a GaAs HBT process. The device is packaged in a 16-lead 5 mm × 5 mm LFCSP that uses an exposed paddle for excellent thermal impedance. The ADL5534 consumes 98 mA of current per amplifier on a single 5 V supply, and is fully specified for operation from −40°C to +85°C. A similar amplifier, ADL5531 (available from Analog Devices, Inc.) is the 20 dB gain single-channel version. Fully populated evaluation boards for both the ADL5531 and ADL5534 are available.

Features and Benefits
  • Fixed gain of 20 dB
  • Operation up to 500 MHz
  • Input/output internally matched to
    50 Ω
  • Integrated bias control circuit
  • OIP3 of 40 dBm at 70 MHz
  • P1dB of 20.4 dBm at 70 MHz
  • Noise Figure of 2.5 dB at 70 MHz
  • Temperature and power supply stable
  • Single 5 V power supply
    • RF & Microwave
    S-Parameters
    Data Sheets
    Documentnote
    ADL5534: 20 MHz to 500 MHz Dual IF Amplifier Data Sheet (Rev. B)PDF 424 kB
    Application Notes
    Documentnote
    AN-1363: Meeting Biasing Requirements of Externally Biased RF/Microwave Amplifiers with Active Bias Controllers (Rev. 0)PDF 804.11 K
    AN-1389: Recommended Rework Procedure for the Lead Frame Chip Scale Package (LFCSP) (Rev. 0)PDF 133.7 K
    MMIC Amplifier Biasing Procedure Application NotePDF 435.1 K
    Broadband Biasing of Amplifiers General Application NotePDF 433.77 K
    Thermal Management for Surface Mount Components General Application NotePDF 189.99 K
    AN-1234: Interfacing the ADL5534 Dual IF Gain Block to the AD9640 High Speed ADC (Rev. B)PDF 208 kB
    AN-772: A Design and Manufacturing Guide for the Lead Frame Chip Scale Package (LFCSP) (Rev. 0)PDF 439 kB
    Order Information
    Part NumberPackagePacking QtyTemp RangePrice 100-499Price 1000+RoHS
    ADL5534ACPZ-R7 Production16 ld LFCSP (5x5mm, 3.1mm exposed pad)REEL 1500-40 to 85C03Y
    Evaluation Boards
    Part NumberDescriptionPriceRoHS
    ADL5534-EVALZEvaluation Board100.19Y
    Reference Materials
    ADL5534: 20 MHz to 500 MHz Dual IF Amplifier Data Sheet (Rev B, 02/2014) ADL5534
    ADL5534 S-Parameters (Rev. A) adl5534
    ADL5534: 20 MHz to 500 MHz Dual IF Amplifier Data Sheet (Rev. B) adl5534
    AN-1363: 利用有源偏置控制器满足外部偏置射频/微波放大器的偏置要求 (Rev. 0) hmc8120
    AN-1363: Meeting Biasing Requirements of Externally Biased RF/Microwave Amplifiers with Active Bias Controllers (Rev. 0) hmc8120
    AN-1389: 引线框芯片级封装(LFCSP)的建议返修程序 (Rev. 0) ad9540
    AN-1389: Recommended Rework Procedure for the Lead Frame Chip Scale Package (LFCSP) (Rev. 0) ad9856
    MMIC Amplifier Biasing Procedure Application Note hmc1049lp5e
    Broadband Biasing of Amplifiers General Application Note hmc1049lp5e
    Thermal Management for Surface Mount Components General Application Note hmc1049lp5e
    AN-772: 引脚架构芯片级封装（LFCSP）设计与制造指南 (Rev. 0) ad9540
    AN-1234: 双中频增益模块ADL5534与高速ADC AD9640的接口 (Rev. B) adl5534
    AN-1234: Interfacing the ADL5534 Dual IF Gain Block to the AD9640 High Speed ADC (Rev. B) adl5534
    AN-772: A Design and Manufacturing Guide for the Lead Frame Chip Scale Package (LFCSP) (Rev. 0) ad9856
    RF Source Booklet adf9010
    CN-0049 adl5534
    Products 产品服务
    Manufacturers 生产厂家
    Sales 联系购买
    ©1993 - 2024 BDTIC