ADP2325 Dual 5 A, 20 V Synchronous Step-Down Regulator with Integrated High-Side MOSFET

The ADP2325 is a full featured, dual output, step-down dc-to-dc regulator based on a current mode architecture. The ADP2325 integrates two high-side power MOSFETs and two low-side drivers for the external N-channel MOSFETs. The two pulse-width modulation (PWM) channels can be configured to deliver dual 5 A outputs or a parallel-to-single 10 A output. The regulator operates from input voltages of 4.5 V to 20 V, and the output voltage can be as low as 0.6 V.

The switching frequency can be programmed between 250 kHz and 1.2 MHz, or synchronized to an external clock to minimize interference in multirail applications. The dual PWM channels run 180° out of phase, thereby reducing input current ripple as well as reducing the size of the input capacitor.

The bidirectional synchronization pin can be programmed at a 60°, 90°, or 120° phase shift, providing the possibility for a stackable multiphase power solution.

The ADP2325 can be set to operate in pulse frequency modulation (PFM) mode at a light load for higher efficiency or in forced PWM for noise sensitive applications. External compensation and soft start provide design flexibility. Independent enable inputs and power-good outputs provide reliable power sequencing.

To enhance system reliability, the device includes undervoltage lockout (UVLO), overvoltage protection (OVP), overcurrent protection, and thermal shutdown.

The ADP2325 operates over the −40°C to +125°C junction temperature range and is available in a 32-lead LFCSP_WQ package.

Applications
  • Communications infrastructure
  • Networking and servers
  • Industrial and instrumentation
  • Healthcare and medical
  • Intermediate power rail conversion
Features and Benefits
  • Input voltage: 4.5 V to 20 V
  • ±1% output accuracy
  • Integrated 48 mΩ typical high-side MOSFET
  • Flexible output configuration
    - Dual output: 5 A/5 A
    - Parallel single output: 10 A
  • Programmable switching frequency: 250 kHz to 1.2 MHz
  • External synchronization input with programmable phase shift, or internal clock output
  • Selectable PWM or PFM mode operation
  • Adjustable current limit for small inductor
  • External compensation and soft start
  • Startup into precharged output
  • Supported by ADIsimPower™ design tool
Power Management
Design Tools
Data Sheets
Documentnote
ADP2325: Dual 5 A, 20 V Synchronous Step-Down Regulator with Integrated High-Side MOSFET Data Sheet (Rev. A)PDF 846 kB
User Guides
Documentnote
UG-374: Evaluation Board for the ADP2325, Dual 5 A, 20 V, Synchronous Step-Down Regulator with Integrated High-Side MOSFETPDF 708 kB
Order Information
Part NumberPackagePacking QtyTemp RangePrice 100-499Price 1000+RoHS
ADP2325ACPZ-R7 Production32 ld LFCSP (5x5mm) w/3.1mm exposed padREEL 1500-40 to 125C02.71Y
Evaluation Boards
Part NumberDescriptionPriceRoHS
ADP2325-EVALZEvaluation Board-1Y
ADP2325:双通道、5 A、20 V同步降压调节器,集成高端MOSFET (Rev. A) adp2325
ADP2325: Dual 5 A, 20 V Synchronous Step-Down Regulator with Integrated High-Side MOSFET Data Sheet (Rev. A) adp2325
ADP232x Buck Regulator Design Tool adp2323
UG-374: Evaluation Board for the ADP2325, Dual 5 A, 20 V, Synchronous Step-Down Regulator with Integrated High-Side MOSFET adp2325