ADV7619 Dual Port, Xpressview, 3 GHz HDMI Receiver

The ADV7619 is a high quality, two input, one output (2:1) multiplexed High-Definition Multimedia Interface (HDMI®) receiver. The ADV7619 is offered in professional (no HDCP keys) and commercial versions. The operating temperature range is 0°C to 70°C.

The ADV7619 incorporates a dual input HDMI-capable receiver that supports all mandatory 3D TV formats defined in the HDMI 1.4a specification, HDTV formats up to 1080p 36-bit Deep Color/2160p 8-bit, and display resolutions up to 4k × 2k (3840 × 2160 at 30 Hz). It integrates an HDMI CEC controller that supports the capability discovery and control (CDC) feature.

The ADV7619 incorporates Xpressview™ fast switching on both input HDMI ports. Using the Analog Devices, Inc., hardware-based HDCP engine to minimize software overhead, Xpressview technology allows fast switching between both HDMI input ports in less than 1 sec.

Each HDMI port has dedicated 5 V detect and Hot Plug™ assert pins. The HDMI receiver also includes an integrated programmable equalizer that ensures robust operation of the interface with long cables.

The ADV7619 offers a flexible audio output port for audio data extraction from the HDMI stream. HDMI audio formats, including SACD via DSD and HBR, are supported by the ADV7619.

The HDMI receiver has advanced audio functionality, such as a mute controller, that prevents audible extraneous noise in the audio output. The ADV7619 contains one main component processor (CP), which processes video signals from the HDMI receiver up to 1080p 36-bit Deep Color. It provides features such as contrast, brightness and saturation adjustments, STDI detection block, free-run, and synchronization alignment controls.

For video formats with pixel clocks higher than 170 MHz, the video signals received on the HDMI receiver are output directly to the pixel port output. To accommodate the higher bandwidth required for these higher resolutions, the output on the pixel bus consists of two 24-bit buses running at up to 150 MHz: one bus contains the even pixels, and the other bus contains the odd pixels. When these two buses are combined, they allow the transfer of video data with pixel clocks up to 300 MHz. In this mode, both 4:4:4 RGB 8-bit and 4:2:2 12-bit are supported.

Fabricated in an advanced CMOS process, the ADV7619 is provided in a 14 mm × 14 mm, 128-lead, surface-mount, RoHS-compliant TQFP_EP package and is specified over the 0°C to 70°C temperature range.

APPLICATIONS
  • Projectors
  • Video conferencing
  • HDTV
  • AVR, HTiB
  • Soundbar
  • Video switch
Features and Benefits
  • All mandatory and additional 3D video formats supported
  • Extended colorimetry, including sYCC601, Adobe RGB, Adobe YCC 601, xvYCC extended gamut color
  • CEC 1.4-compatible
  • 297 MHz maximum TMDS clock frequency
  • Supports 4k × 2k resolution
  • Xpressview fast switching of HDMI ports
  • Audio support including high bit rate (HBR) and direct stream digital (DSD)
  • S/PDIF (IEC 60958-compatible) digital audio support
  • Interrupt controller with two interrupt outputs
  • Standard identification (STDI) circuit
  • Highly flexible, 48-bit pixel output interface
  • See data sheet for additional features
Audio & Video Products
IBIS Models
Design Tools
Software & Systems Requirements
Data Sheets
Documentnote
ADV7619: Dual Port, Xpressview, 3 GHz HDMI Receiver Data Sheet (Rev. D)PDF 79 kB
Application Notes
Documentnote
AN-1283: Receiving the 4:2:0 Stream with the ADV7619PDF 87 kB
AN-1260: Crystal Design Considerations for Video Decoders, HDMI Receivers, and Transceivers (Rev. 0)PDF 126 kB
AN-1180: Optimizing Video Platforms for Automated Post-Production Self-Tests (Rev. 0)PDF 187 kB
User Guides
Documentnote
UG-338: Advantiv EVAL-ADV7619-7511 Video Evaluation BoardPDF 361 kB
UG-237: Dual Port Xpressview™ Advantiv HDMI Receiver ADV7619 Functionality and FeaturesPDF 1788 kB
Order Information
Part NumberPackagePacking QtyTemp RangePrice 100-499Price 1000+RoHS
ADV7619KSVZ Contact ADI128 ld TQFP (14x14mm W6.35EP)OTH 900 to 70C7.585.61Y
ADV7619KSVZ-P Production128 ld TQFP (14x14mm W6.35EP)OTH 900 to 70C8.716.45Y
Evaluation Boards
Part NumberDescriptionPriceRoHS
EVAL-ADV7619-7511Stand-Alone Evaluation Board199Y
EVAL-ADV7619-7511PStand-Alone Eval Board (No HDCP Keys)199Y
ADV7619: Dual Port, Xpressview, 3 GHz HDMI Receiver Data Sheet (Rev. D) adv7619
ADV7619 IBIS Model adv7619
ADV7xx Limit MCLK Output Frequency adv7611
ADV7619 HDMI Receiver Library API Source Code for any OS\Platform (exe) adv7619
AN-1283: 采用ADV7619接收4:2:0流 (Rev. 0) adv7619
AN-1283: Receiving the 4:2:0 Stream with the ADV7619 adv7619
AN-1260: Crystal Design Considerations for Video Decoders, HDMI Receivers, and Transceivers (Rev. 0) adv7401
AN-1260:视频解码器、 HDMI 接收器和收发器的晶振设计考虑因素 adv7401
AN-1180: 针对生产后自测优化视频平台 (Rev. 0) adv7123
AN-1180: Optimizing Video Platforms for Automated Post-Production Self-Tests (Rev. 0) adv7123
UG-338: Advantiv EVAL-ADV7619-7511 Video Evaluation Board adv7619
UG-237: Dual Port Xpressview™ Advantiv HDMI Receiver ADV7619 Functionality and Features adv7619