ADXL203 Precision ±1.7 g, ±5 g, ±18 g Dual-Axis iMEMS® Accelerometer

The ADXL103/ADXL203 are high precision, low power, complete single- and dual-axis accelerometers with signal conditioned voltage outputs, all on a single, monolithic IC. The ADXL103/ADXL203 measure acceleration with a full-scale range of ±1.7 g, ±5 g, ±18 g. The ADXL103/ADXL203 can measure both dynamic acceleration (for example, vibration) and static acceleration (for example, gravity).

A typical noise floor as low as 110 µg/√Hz, allows signals below 1 mg (0.06° of inclination) to be resolved in tilt sensing applications using narrow bandwidths (<60 Hz).

The user selects the bandwidth of the accelerometer using Capacitor CX and Capacitor CY at the XOUT and YOUT pins. Bandwidths of 0.5 Hz to 2.5 kHz may be selected to suit the application.

The ADXL103 and ADXL203 are available in 5 mm × 5 mm × 2 mm, 8-pad hermetic LCC packages.

Applications
  • Vehicle dynamic control (VDC)/electronic stability program (ESP) systems
  • Electronic chassis control
  • Electronic braking
  • Platform stabilization/leveling
  • Navigation
  • Alarms and motion detectors
  • High accuracy, 2-axis tilt sensing
Features and Benefits
  • High performance, single-axis accelerometer on a single IC chip
  • 5 mm × 5 mm × 2 mm LCC package
  • 1 mg resolution at 60 Hz
  • Low power: 700 µA at VS = 5 V (typical)
  • High zero g bias stability
  • High sensitivity accuracy
  • –40°C to +125°C temperature range
  • X and Y axes aligned to within 0.1° (typical)
  • BW adjustment with a single capacitor
  • Single-supply operation
  • 3500 g shock survival
  • RoHS-compliant
MEMS
ADXL203 Simulink Model
Reference Designs
Data Sheets
Documentnote
ADXL103/ADXL203: Precision ±1.7 g, ±5 g, ±18 g Single-/ Dual-Axis iMEMS® Accelerometer Data Sheet (Rev. E)PDF 336 kB
Application Notes
Documentnote
AN-1057: Using an Accelerometer for Inclination Sensing (Rev. 0)PDF 168 kB
AN-688: Phase and Frequency Response of iMEMS® Accelerometers and Gyros (Rev. 0)PDF 135 kB
AN-0989: Transitioning from ADXL202 to ADXL213 or ADXL203 (Rev. 0)PDF 76 kB
AN-652: Considerations for Soldering Accelerometers in LCC-8 Packages onto Printed Circuit Boards (Rev. 0)PDF 396 kB
Frequently Asked Questions
Documentnote
Order Information
Part NumberPackagePacking QtyTemp RangePrice 100-499Price 1000+RoHS
AD22037Z Production8 ld LCCOTH 95-40 to 125C16.8212.23E
AD22293Z Production8 ld LCCOTH 95-40 to 125C16.8212.23E
AD22293Z-RL Production8 ld LCCREEL 3000-40 to 125C012.23E
AD22293Z-RL7 Production8 ld LCCREEL 250-40 to 125C16.8212.23E
ADW22037Z Production8 ld LCCOTH 95-40 to 125C00E
ADW22037Z-RL Production8 ld LCCREEL 3000-40 to 125C00E
ADW22037Z-RL7 Production8 ld LCCREEL 250-40 to 125C00E
ADW22293ZA Last Time Buy8 ld LCCREEL 3000-40 to 125C00E
ADXL203CE Production8 ld LCCOTH 95-40 to 125C16.8212.23E
ADXL203CE-REEL Production8 ld LCCREEL 3000-40 to 125C012.23E
Evaluation Boards
Part NumberDescriptionPriceRoHS
ADXL203EBEvaluation Board30.31Y
Reference Materials
ADXL103/ADXL203:精密±1.7 g/±5 g/±18 g单轴/双轴iMEMS®加速度计 (Rev. E) adxl103
ADXL103/ADXL203: Precision ±1.7 g, ±5 g, ±18 g Single-/ Dual-Axis iMEMS® Accelerometer Data Sheet (Rev. E) adxl103
ADXL203 Description File adxl203
ADXL203 Simulink File adxl203
ADXL203 Constants File adxl203
ADXL203 Main File adxl203
设计和集成文件 adxl203
AN-1057: Using an Accelerometer for Inclination Sensing (Rev. 0) adxl103
AN-688: Phase and Frequency Response of iMEMS® Accelerometers and Gyros (Rev. 0) adxrs622
AN-1057: 利用加速度计进行倾斜检测 (Rev. 0) adxl103
AN-378: 降低加速度计的平均功率 (Rev. .) adxl203
AN-0989: 从ADXL202过渡到ADXL213或ADXL203 (Rev. 0) adxl103
AN-652: 将LCC-8封装加速度计焊接到印刷电路板上时的考虑因素 (Rev. 0) adxl193
AN-0989: Transitioning from ADXL202 to ADXL213 or ADXL203 (Rev. 0) adxl103
AN-688: iMEMS®加速度计和陀螺仪的相位与频率响应 (Rev. 0) adxrs622
AN-652: Considerations for Soldering Accelerometers in LCC-8 Packages onto Printed Circuit Boards (Rev. 0) adxl193
CN-0189:使用双轴加速度计进行倾斜测量 adxl203