SAF-XE164FM-48F80L AA

The devices offer new safety features for safety integrity level (SIL) 2 and 3 applications such as an MPU (Memory Protection Unit), MCHK (Memory Checker) and ECC (Error Correction) for flash memory and SRAM.

ParametricSAF-XE164FM-48F80L AA
Clock Frequency  max80.0MHz
SRAM (incl. Cache)34.0kByte
CAN Nodes4
A/D Input Lines (incl. FADC)16
Program Memory384.0kByte
Type of MemoryFlash
FlexRayTMno
Number of ADC Modules2.0
Digital I/O Pins76
EEPROM Emulation (Data-Flash)yes
Timed I/O Pins (PWM, CAPCOM)37
Serial I/O Interfaces6
Type of Serial I/O InterfacesCAN
Type of Serial I/O InterfacesI²C
Type of Serial I/O InterfacesI²S
Type of Serial I/O InterfacesLIN
Type of Serial I/O InterfacesSPI
Type of Serial I/O InterfacesUART
Instruction Width ([bits])16/32
Instruction Set ArchitectureC166S V2 (16-bit)
Peripheral Control Processorno
DMA Channels8
Timer/Counter11
External Bus Interfaceyes
Fast Flash Programmingno
Temperature-40 to 85°C
Power Mode3
DSP Functionalityyes
On-chip Clock Generationyes
I/O Operation Voltages3.3V
I/O Operation Voltages5.0V
Touch/LED Matrix Controlno
On-chip Voltage Regulatoryes
Real Time Clockyes
Floating Point Unitno
Watchdog Timeryes
Oscillator Watchdogyes
QualificationIndustrial
Additional FeaturesFunctional Packing: TAPE & REEL, Minimum Order Quantity:1400
Summary of Features:
  • Package: PG-LQFP-100
  • CAN Nodes: 4
  • Program Memory: 384.0 KByte
  • FlexRay™: no
  • Type of Serial I/O Interfaces: 6 x SPI, LIN, UART, IIC, IIS
Data Sheet
TitleSizeDateVersion
XE164xM Data Sheet,EN1.7 MB07 Jul 201502_01
XE164xM数据手册,CN1.9 MB07 Jul 201502_00
Application Notes
TitleSizeDateVersion
AP24026 - EMC and System-ESD Design Guidelines for Board LayoutEN2.9 MB15 Mar 201603_05
Power Management with SCU Driver - description702 KB13 Aug 201301_01
XE166/XC2000 Pin Configuration, Power Supply and Reset1.3 MB08 Jun 201101_01
Design Guideline for XC2000 and XE16x Microcontroller Board Layout823 KB24 May 201301_02
EEPROM Emulation Driver for XC2000 / XE166 - description1.2 MB09 Jul 201201_03
OLED Display2 MB01 Sep 200901_00
DSP Optimization Guide for XC2000/XC166/XE166 Microcontroller Families with MAC Unit965 KB03 Jan 201201_01
User Manual
TitleSizeDateVersion
XC2000/XE166 Programmers Guide2.1 MB15 Sep 201002_01
C166S V2 Core User's Manual5.3 MB02 Jan 201201_07
Errata Sheet
TitleSizeDateVersion
XE166M Errata Sheet1.9 MB02 Jul 201301_06
Training
TitleSizeDateVersion
XE164 Hands-On Training HelloWorld1.4 MB04 Jul 2008
XE164 Hands-On Training ASC-Link1.5 MB04 Jul 2008
Evaluation Boards
BoardFamilyDescriptionStatus
KIT_AK_2MOTORDRIVE_V1MicrocontrollerXC878 with vector computer, XE164 real time signal controller with MAC unit. Power board 23V–56V, 7.5A. 15W PMSM motor and plug-in 24V power supply. Using Infineon 6ED003L06 gate driver, BSC 196N10 MOSFETs, CoolSET™ ICE 3B0565 power supply and TLE 4264 LDO. Software package including source code. Simultaneous control of two PMSMs with sensorless FOC & digital PFC with XE164. Sensorless FOC & digital PFC with XC878. V/f control of ACIM for quick evaluation.XC878XE164Fon request
KIT_AK_DAVEDRIVE_V3MicrocontrollerScalable low voltage PMSM motor driver kit with DAVE™ Drive auto code generator. Uses the full power of Infineon microcontrollers, e.g. it generates optimized FOC code for XC878 using a vector computer and XE164 with MAC unit supporting single cycle 16 x 16-bit multiplication and accumulation. This usually requires expert knowledge in both motor control and assembler programming.XC878XE164active and preferred
KIT_AK_FOCDRIVE_V1MicrocontrollerXC878 with vector computer, XE164 real time signal controller with MAC unit. Power board 23V–56V, 7.5A. 15W PMSM motor and plug-in 24V power supply. Using Infineon 6ED003L06 gate driver, BSC 196N10 MOSFETs, CoolSET™ ICE 3B0565 power supply and TLE 4264 LDO. Software package including source code. Sensorless FOC of PMSM with XE164. Sensorless FOC of PMSM with XC878.XC878XE164Factive and preferred
KIT_DAP_MINIWIGGLER_USBMicrocontrollerThe miniWiggler is Infineon’s high performance and cost-efficient debugging tool for the future. On the host side, it has an USB interface, which is available on every computer. On the device side, the communication goes over Infineon 10-pin DAP or 16-pin OCDSL1 interfaces. The miniWiggler has been designed specifically to work in combination with Infineon’s Debug Access Software (DAS).All microcontrollers with DAP interfaceactive and preferred
KIT_XE164F_EK_V1MicrocontrollerFor evaluation of XE164/XE167 including documentation, compiler, debugger, DAVE™ mother system v2.1 and a flash programming tool.XE164FXE167F
KIT_XE164FM_EK_V1MicrocontrollerFor evaluation of XE162FM/XE164FM/XE167FM including Getting Started, DAVE™ , technical documentation, compiler and debugger. USB cable for power supply, virtual COM port and flash programming and debugging.XE162FMXE164FMXE167FMactive and preferred
EN SAK-XE164FM-72F80L+AA
CN SAK-XE164FM-72F80L+AA
EN SAK-C505CA-2RM+CA
Power Management with SCU Driver - description SAK-XC2220U-8F40V+AA
XE166/XC2000 Pin Configuration, Power Supply and Reset SAK-XC2220U-8F40V+AA
Design Guideline for XC2000 and XE16x Microcontroller Board Layout SAK-XC2220U-8F40V+AA
EEPROM Emulation Driver for XC2000 / XE166 - description SAK-XC2220U-8F40V+AA
OLED Display SAK-XE169FH-200F100L+AB
DSP Optimization Guide for XC2000/XC166/XE166 Microcontroller Families with MAC Unit SAK-XC2220U-8F40V+AA
XC2000/XE166 Programmers Guide SAK-XC2220U-8F40V+AA
C166S V2 Core User's Manual SAF-XC167CI-32F40F+BB-A
XE166M Errata Sheet SAK-XE167FM-72F80L+AA
XE164 Hands-On Training HelloWorld SAK-XE169FH-200F100L+AB
XE164 Hands-On Training ASC-Link SAK-XE169FH-200F100L+AB