LT3650-8.X - High Voltage 2 Amp Monolithic 2-Cell Li-Ion Battery Charger

The LT3650 is a complete monolithic 2-cell Li-Ion/Polymer battery charger that operates over a 9V to 32V input voltage range (11.5V minimum start-up voltage). The LT3650 provides a constant-current/constant-voltage charge characteristic, with maximum charge current externally programmable up to 2A, set using an external current sense resistor. A precondition feature trickle-charges a low voltage battery, and bad-battery detection provides a signal and suspends charging if a battery does not respond to preconditioning. The LT3650 can be configured to terminate charging when charge current falls to C/10, or one-tenth the programmed maximum current. Once charging is terminated, the LT3650 enters a low current (85μA) standby mode. An auto-restart feature starts a new charging cycle if the battery voltage drops 2.5% from the float voltage, or if a new battery is inserted into a charging system. The LT3650 contains a user-programmable internal safety timer (typically set to a three hour full cycle time). The IC can be configured to use this internal timer if a time-based termination scheme is desired in which charging can continue below C/10 until a desired time is reached. The LT3650 is available in a low profile (0.75mm) 3mm × 3mm 12-pin DFN and 12-pin MSOP packages.

Features
  • Wide Input Voltage Range: 9V to 32V (40V Absolute Maximum)
  • Programmable Charge Current: Up to 2A
  • User-Selectable Termination: C/10 or Onboard Termination Timer
  • Dynamic Charge Rate Programming/Soft-Start Pin
  • Programmable Input Current Limit
  • 1MHz Fixed Frequency
  • Average Current Mode Control
  • 0.5% Float Voltage Accuracy
  • 5% Charge Current Accuracy
  • 2.5% C/10 Detection Accuracy
  • NTC Resistor Temperature Monitor
  • Auto-Recharge at 97.5% Float Voltage
  • Auto-Precondition at <70% Float Voltage
  • Bad Battery Detection with Auto-Reset
  • Binary Coded Open-Collector Status Pins
  • 3mm × 3mm DFN-12 or MSOP-12 Package
Typical Application

Applications
  • Industrial Handheld Instruments
  • 12V to 24V Automotive and Heavy Equipment
  • Desktop Cradle Chargers
  • Notebook Computers
Packaging

Order Information
Part NumberPackageTempPrice(1-99)Price (1k)*
LT3650EDD-8.2#PBF3x3 DFN-12E$4.00$2.80
LT3650EDD-8.2#TRPBF3x3 DFN-12E$2.86
LT3650EDD-8.4#PBF3x3 DFN-12E$4.00$2.80
LT3650EDD-8.4#TRPBF3x3 DFN-12E$2.86
LT3650EMSE-8.2#PBFMS-12EE$4.00$2.80
LT3650EMSE-8.2#TRPBFMS-12EE$2.86
LT3650EMSE-8.4#PBFMS-12EE$4.00$2.80
LT3650EMSE-8.4#TRPBFMS-12EE$2.86
LT3650IDD-8.2#PBF3x3 DFN-12I$4.60$3.22
LT3650IDD-8.2#TRPBF3x3 DFN-12I$3.28
LT3650IDD-8.4#PBF3x3 DFN-12I$4.60$3.22
LT3650IDD-8.4#TRPBF3x3 DFN-12I$3.28
LT3650IMSE-8.2#PBFMS-12EI$4.60$3.22
LT3650IMSE-8.2#TRPBFMS-12EI$3.28
LT3650IMSE-8.4#PBFMS-12EI$4.60$3.22
LT3650IMSE-8.4#TRPBFMS-12EI$3.28
Demo Boards
Part NumberDescriptionPrice
DC1473A-ALT3650EDD-8.4 Demo board | High Voltage 2 Amp Monolithic 2-Cell Li-Ion Battery Charger$150.00
DC1473A-BLT3650EDD-8.2 Demo board | High Voltage 2 Amp Monolithic Li-Ion Battery Charger$150.00
Datasheet
Reliability Data
Product Selector Card
LT Journal
Press Release
LTspice
Related Product
LT3650-8.2/LT3650-8.4 - High Voltage 2 Amp Monolithic 2-Cell Li-Ion Battery Charger
LT3650-8.2 Package Drawing LT3650-8.2
R541 - Reliability Data
20V Battery Gas Gauge
June 2009 - Charge Li-Ion Batteries Directly from High Voltage Automotive and Industrial Supplies Using Standalone Charger in a 3mm × 3mm DFN
LT3650-8.2 - 采用紧凑型 3mm x 3mm 封装的 32V 单片式两节锂离子/聚合物电池充电器提供高达 2A 电流
LT3650-8.2 Footprints and Symbols
LT3650-8.4 Demo Circuit - Two-Cell Li-Ion 2A Charger (12-32V to 8.4V @ 2A)