• 简体中文
• English

LT6015 - 3.2MHz, 0.8V/μs Low Power, Over-The-Top Precision Op Amps

The LT®6015/LT6016/LT6017 are single/dual/quad rail-torail input operational amplifiers with input offset voltage trimmed to less than 50μV. These amplifiers operate on single and split supplies with a total voltage of 3V to 50V and draw only 315μA per amplifier. They are reverse battery protected, drawing very little current for reverse supplies up to 50V.

The Over-The-Top® input stage of the LT6015/LT6016/ LT6017 is designed to provide added protection in tough environments. The input common mode range extends from V– to V+ and beyond: these amplifiers operate with inputs up to 76V above V– independent of V+. Internal resistors protect the inputs against transient faults up to 25V below the negative supply. The LT6015/LT6016/ LT6017 can drive loads up to 25mA and are unity-gain stable with capacitive loads as large as 200pF. Optional external compensation can be added to extend the capacitive drive capability beyond 200pF.

The LT6015 is offered in a 5-lead SOT package. The LT6016 dual op amp is available in an 8-lead MSOP package. The LT6017 is offered in a 22-pin leadless DFN package.

Features Input Common Mode Range: V– to V– + 76V Rail-to-Rail Input and Output Low Power: 315μA/Amplifier Operating Temperature Range: –55°C to 150°C VOS: ±50μV (Maximum) CMRR, PSRR: 126dB Reverse Battery Protection to 50V Gain Bandwidth Product: 3.2MHz Specified on 5V and ±15V Supplies High Voltage Gain: 1000V/mV No Phase Reversal No Supply Sequencing Problems Single 5-Lead SOT-23 (ThinSOT™) Package Dual 8-Lead MSOP Quad 22-Lead DFN (6mm × 3mm) Typical Application

Applications High Side or Low Side Current Sensing Battery/Power Supply Monitoring 4mA to 20mA Transmitters High Voltage Data Acquisition Battery/Portable Instrumentation Packaging

Demo Boards