LTC3884 - Dual Output PolyPhase Step-Down Controller with Sub-Milliohm DCR Sensing and Digital Power System Management

The LTC®3884 is a dual output PolyPhase DC/DC synchronous step-down switching regulator controller with an I2C-based PMBus compliant serial interface. The controller employs a constant-frequency current mode architecture, together with a unique scheme to provide excellent performance for sub-milliohm DCR applications. The LTC3884 is supported by the LTpowerPlay® software development tool with graphical user interface (GUI).

Programmable loop compensation allows the controller to be compensated digitally. Switching frequency, channel phasing output voltage, and device address can be programmed both by the digital interface as well as external configuration resistors. Additionally, parameters can be set via the digital interface or stored in EEPROM. Both outputs have independent power good indicators and FAULT function.

The LTC3884 can be configured for discontinuous (pulseskipping) mode or continuous inductor current mode.

Features
  • PMBus/I2C Compliant Serial Interface– Telemetry Read-Back Includes VIN, IIN, VOUT, IOUT, Temperature and Faults – Programmable Voltage, Current Limit, Digital Soft- Start/Stop, Sequencing, Margining, OV/UV/OC
  • Sub-Milliohm DCR Current Sensing
  • Digitally Adjustable Loop Compensation Parameters
  • ±0.5% Output Voltage Accuracy Over Temperature
  • Integrated Input Current Sense Amplifier
  • Internal EEPROM and Fault Logging
  • Integrated N-Channel MOSFET Gate Drivers
  • Wide VIN Range: 4.5V to 38V
  • VOUT Range: 0.5V to 3.5V (with Low DCR Setting); 0.5V to 5.5V (without Low DCR Setting)
  • Accurate PolyPhase® Current Sharing for Up to 6 Phases
  • Available in a 48-Lead (7mm × 7mm) QFN Package
Typical Application

Applications
  • Telecom, Datacom, and Storage Systems
  • Industrial and Point-of-Load Applications
Packaging
Order Information
Part NumberPackageTempPrice(1-99)Price (1k)*
LTC3884EUK#PBF7x7 QFN-48E$9.07$6.35
LTC3884EUK#TRPBF7x7 QFN-48E$6.41
LTC3884IUK#PBF7x7 QFN-48I$9.91$6.94
LTC3884IUK#TRPBF7x7 QFN-48I$7.00
Demo Boards
Part NumberDescriptionPrice
DC2165ALTC3884EUK Demo Board | Dual PMBus Buck, 4.5V ≤ Vin ≤ 14V, Vout0/Vout1 = 0.5V to 1.8V @ 30A$200.00
DC2283ALTC3884EUK Demo Board | LTC3884(x2) 4-Phase PMBus Buck, 7V ≤ VIN ≤ 14V; 0.5V ≤ VOUT ≤ 1.5V @ 160AContact Factory
Companion Boards
Part NumberDescriptionPrice
DC1613AUSB-to-PMBus Controller for Use with LTpowerPlay$50.00
Datasheet
Application Note
Reliability Data
Product Selector Card
Press Release
CAD Symbol CAD Symbols and Footprints: The downloadable Zip file below contains the schematic symbol and PCB footprint compatible with Cadence ORCAD® v16.5 or later, Mentor Graphics PADS® v9.5 or later, and Altium 14.2.5 or later.
Related Product
LTC3884 - Dual Output PolyPhase Step-Down Controller with Sub-Milliohm DCR Sensing and Digital Power System Management
Product Errata - LTC3884
AN145 - Overview of the EEPROM in LTC PSM Devices
R526 - Reliability Data
Digital Power System Management
38V 双输出 DC/DC 控制器具电流模式控制、mΩ 以下 DCR 检测、I2C/PMBus 接口和可编程环路补偿
LTC3884 Footprints and Symbols
LTC3884 & LTC3874 Project - PolyPhase Digital PSM Step-Down with Ultra-Low DCR Sensing Plus Two Slave Controllers (10-14V to 1V @ 240A)