LTM4606 - Ultralow EMI 28VIN, 6A DC/DC μModule (Power Module) Regulator

The LTM®4606 is a complete EN55022 Class B certified noise high voltage 6A switching mode DC/DC power supply. Included in the package are the switching controller, power FETs, inductor, and all support components. The on-board input filter and noise cancellation circuits achieve low noise operation, thus effectively reducing the electromagnetic interference (EMI). Operating over an input voltage range of 4.5V to 28V, the LTM4606 supports an output voltage range of 0.6V to 5V, set by a single resistor. This high efficiency design delivers 6A continuous current (8A peak). Only bulk input and output capacitors are needed to finish the design.

High switching frequency and an adaptive on-time current mode architecture enables a very fast transient response to line and load changes without sacrificing stability. The device supports output voltage tracking and output voltage margining.

Furthermore, the μModule® regulator can be synchronized with an external clock for reducing undesirable frequency harmonics and allows PolyPhase® operation for high load currents.

The LTM4606 is offered in space saving 15mm × 15mm × 2.82mm LGA and 15mm × 15mm × 3.42mm BGA packages. The LTM4606 is available with SnPb (BGA) or RoHS compliant terminal finish.

Features
  • Complete Low EMI Switch Mode Power Supply
  • Wide Input Voltage Range: 4.5V to 28V
  • 6A DC Typical, 8A Peak Output Current
  • 0.6V to 5V Output Voltage Range
  • EN55022 Class B Certified
  • Output Voltage Tracking and Margining
  • PLL Frequency Synchronization
  • ±1.75% Total DC Error
  • Power Good Output
  • Current Foldback Protection (Disabled at Start-Up)
  • Parallel/Current Sharing
  • Current Mode Control
  • Up to 93% Efficiency at 5VIN, 3.3VOUT
  • Programmable Soft-Start
  • Output Overvoltage Protection
  • –55°C to 125°C Operating Temperature Range (LTM4606MP)
  • SnPb or RoHS Compliant Finish
  • 15mm × 15mm × 2.82mm LGA Package 15mm × 15mm × 3.42mm BGA Package
Typical Application
LTM4606 Typical Application
LTM4606 Typical Application
Applications
  • ASICs or FPGA Transceivers
  • Telecom, Servers and Networking Equipment
  • Industrial Equipment
  • RF Equipment
Packaging
LTM4606 Package Drawing
LTM4606 Package Drawing
Order Information
Part NumberPackageTempPrice(1-99)Price (1k)*
LTM4606EV#PBF15mm × 15mm × 2.82mm LGAE$23.57$16.50
LTM4606EY#PBF15mm x 15mm x 3.42mm BGAE$25.00$17.50
LTM4606IV#PBF15mm × 15mm × 2.82mm LGAI$25.93$18.15
LTM4606IY#PBF15mm x 15mm x 3.42mm BGAI$27.36$19.15
LTM4606MPV#PBF15mm × 15mm × 2.82mm LGAMP$53.00$37.10
LTM4606MPY15mm x 15mm x 3.42mm BGAMP$69.62$48.74
LTM4606MPY#PBF15mm x 15mm x 3.42mm BGAMP$54.43$38.10
Demo Boards
Part NumberDescriptionPrice
DC1295BLTM4606EV Demo Board | EN55022B Compliant, 4.5V ≤ VIN ≤28V, VOUT = 0.6V to 5V @ 6A$65.00
Datasheet
Reliability Data
Product Selector Card
LT Journal
Press Release
CAD Symbol
LTspice
Related Products
LTM4606 - Ultralow EMI 28VIN, 6A DC/DC uModule Regulator
Low EMI μModule Regulators
为 EMI 敏感和高速 SERDES 系统供电
LTM4606/LTM4612 - 超低噪声 DC/DC 微型模块稳压器满足 EMI 和多千兆位 SERDES 规范要求
EMI Test Report (LTM4606/EN55022B)
R504 - Reliability Data
Low EMI μModule Regulators
SnPb (Tin-Lead) BGA Packages μModule Power Products
μModule Power Products Catalog
Jan 2009 - Ultralow Noise 15mm ×15mm × 2.8mm uModule Step-Down Regulators Meet the Class B of CISPR 22 and Yield High Efficiency at up to 36VIN
Ultralow Noise DC/DC uModule Regulators Meet Both EMI & Multi-Gigabit SERDES Specifications
LTM4606 Footprints and Symbols
LTM4606 Demo Circuit - Ultralow EMI 6A, 28Vin Step-Down uModule (12V to 2.5V @ 6A)