FlexMod Low Voltage Disconnects Series - Preserves Starting Voltage by Isolating Auxiliary Battery when System Voltage Drops

DataSheet:Download FlexMod LVD Hotfeed

The FlexMod Low Voltage Disconnect unit preserves battery charge and protects battery banks by automatically disconnecting loads when battery voltage drops to a critical level.
Automatically disconnects specified loads when unit senses that vehicle battery voltage is low; automatically reconnects when voltage is restored. Protects vehicles with one battery (or bank of batteries).

Features & Benefits

  • Compact design (4” x 3” x 1”) unit is waterproof, dustproof and vibration-proof.  Mounts anywhere on a vehicle, even places where road-splash is a problem. Sealed to IP67 standard. 
  • Senses battery voltage and disconnects non-essential loads if level falls below programmed voltage. Automatically reconnects loads when battery is charging.  
  • Eliminates downtime and vehicle breakdown costs due to dead batteries.
  • High reliability unit is rated for more than 1,000,000 on/off cycles.
  • Overvoltage and overcurrent sensing protects the FlexMod and direct loads.
  • Single auto-ranging unit (12V or 24V) means less stock and fewer SKUs.
  • Unit is autoranging - senses 12V or 24V systems.

Ordering Information

Ordering Information
Catalog #ConnectorDescriptionDetailsDimensionsDisconnect voltage (12V)Disconnect voltage (24V)HumidityInductive transientIngress ProtectionLoad current
486108-pin Sealed Deutsch typeFlexMod LVD Unit Only10 A4 x 2.7 x 1.3112.05 V min12.1 V typical12.15 V max24.1 V min24.2 V typical24.3 max0 to 90% RH+/- 600 VIP6710 A at 85C
48610-018-pin Sealed Deutsch typeFlexMod LVD Unit and 12805 Harness10 A4 x 2.7 x 1.3112.05 V min12.1 V typical12.15 V max24.1 V min24.2 V typical24.3 max0 to 90% RH+/- 600 VIP6710 A at 85C
487108-pin Sealed Deutsch typeProgrammable FlexMod LVD Unit10 A4 x 2.7 x 1.31Programmable AttributeProgrammable Attribute0 to 90% RH+/- 600 VIP6710 A at 85C
Resources
Download FlexMod Battery Isolator Controller Datasheet flexmod-battery-isolator-controller
48540 - FlexMod™ Battery Isolator Controller Info Sheet flexmod-battery-isolator-controller
48610 - FlexMod™ Low Voltage Disconnect Info Sheet flexmod-low-voltage-disconnects
48610 & 48710 - Low Voltage Disconnect 2D Prints flexmod-low-voltage-disconnects
48610 FlexMod LVD Installation Guide flexmod-low-voltage-disconnects