• 简体中文
• English

DS1225AB：64k Nonvolatile SRAM

The DS1225AB and DS1225AD are 65,536-bit, fully static, nonvolatile (NV) SRAMs organized as 8192 words by 8 bits. Each NV SRAM has a self-contained lithium energy source and control circuitry which constantly monitors VCC for an out-of-tolerance condition. When such a condition occurs, the lithium energy source is automatically switched on and write protection is unconditionally enabled to prevent data corruption. The NV SRAMs can be used in place of existing 8k x 8 SRAMs directly conforming to the popular bytewide 28-pin DIP standard. The devices also match the pinout of the 2764 EPROM and the 2864 EEPROM, allowing direct substitution while enhancing performance. There is no limit on the number of write cycles that can be executed and no additional support circuitry is required for microprocessor interfacing.

Key Features 10 years minimum data retention in the absence of external power Data is automatically protected during power loss Directly replaces 8k x 8 volatile static RAM or EEPROM Unlimited write cycles Low-power CMOS JEDEC standard 28-pin DIP package Read and write access times of 70ns Lithium energy source is electrically disconnected to retain freshness until power is applied for the first time Full ±10% VCC operating range (DS1225AD) Optional ±5% VCC operating range (DS1225AB) Optional industrial temperature range of -40°C to +85°C, designated IND

DS1225AB, DS1225AD: Pin Assignment

DataSheet

Parametrics

Ordering Information