DS1371:I²C, 32-Bit Binary Counter Watchdog Clock

Industry's Lowest-Cost Single-Supply Binary Timekeeper for Ultra-Low-Power Applications

The DS1371 is a 32-bit binary counter that is designed to continuously count time in seconds. An additional counter that can generate a periodic alarm or serve as a watchdog timer is also provided. If enabled as a watchdog timer, the watchdog strobe input pin provides a hardware reset of the counter. If disabled, this counter can be used as 3 Bytes of general-purpose RAM. A configurable output can be used as an interrupt or provide a square wave at one of four selectable frequencies. The device is programmed serially through a I²C bidirectional bus.

Key Features
  • 32-Bit Binary Counter
  • 24-Bit Binary Counter Provides Periodic Alarm, Watchdog Timer, or RAM
  • Strobe Input to Reset Watchdog Timer
  • Single Output Configurable as Interrupt or Square Wave
  • I²C Serial Interface
  • Low-Voltage Operation
  • Operating Temperature Range: -40°C to +85°C
  • Available in 8-Pin µSOP
DS1371: Typical Operating Circuit
DS1371: Typical Operating Circuit
Applications/Uses
  • Elapsed Time Measurements
  • Point-of-Sale Equipment
  • Portable Instrumentation
  • Servers
DataSheet
titleDownload file
DS1371 Data SheetDS1371.pdf
Parametrics
Part NumberInterfaceVSUPPLY
(V)
Time Keeping Current
(nA)
CL
(pF)
Memory TypeTime of Day AlarmsFunctionsPackage/PinsBudgetary
Price
typSee Notes
DS1371I2C2
3
3.3
5
8006None1Elapsed Time Counter
Watchdog Timekeeper
µMAX/8$1.18 @1k
Quality and Environmental Data
Related Products
  • DS1672:I²C 32-Bit Binary Counter RTC
Ordering Information
Part NumberStatusRecommended ReplacementPackageTempRoHS
DS1371UNo Longer AvailableDS1371U+µMAX,;8 pin;15.6 mm²-40°C to +85°CNo
DS1371U+ActiveµMAX,;8 pin;15.6 mm²-40°C to +85°CLead Free
DS1371U+T&RActiveµMAX,;8 pin;15.6 mm²-40°C to +85°CLead Free
DS1371U/T&RNo Longer AvailableDS1371U+T&RµMAX,;8 pin;15.6 mm²-40°C to +85°CNo
DS1371.pdf DS1371
DS1371.pdf DS1371
DS1371.pdf DS1371
Tips for Writing Bulletproof Real-Time Clock Control Code DS3234
Oscillator Design Considerations for Low-Current Applications DS17885
Using the DS32kHz with Maxim Real-Time Clocks DS17885
Using the Watchdog/Alarm Counter in the DS1371 and DS1374 Real-Time Clocks DS1371
Using the DS1672 Low-Voltage Serial Timekeeping IC DS1672
Design Considerations for Maxim Real-Time Clocks DS3234
Crystal Considerations with Maxim Real-Time Clocks (RTCs) DS3234
DS1371.pdf DS1371
DS1371.pdf DS1371