MAX107:Dual, 6-Bit, 400Msps ADC with On-Chip, Wideband Input Amplifier

The MAX107 is a dual, 6-bit, analog-to-digital converter (ADC) designed to allow fast and precise digitizing of in-phase (I) and quadrature (Q) baseband signals. The MAX107 converts the analog signals of both I and Q components to digital outputs at 400Msps while achieving a signal-to-noise ratio (SNR) of typically 37dB with an input frequency of 125MHz, and an integral nonlinearity (INL) and differential nonlinearity (DNL) of ±0.25 LSB. The MAX107 analog input preamplifiers feature a 400MHz, -0.5dB, and a 1.5GHz, -3dB analog input bandwidth. Matching channel-to-channel performance is typically 0.04dB gain, 0.1LSB offset, and 0.2 degrees phase. Dynamic performance is 36.7dB signal-to-noise plus distortion (SINAD) with a 125MHz analog input signal and a sampling speed of 400MHz. A fully differential comparator design and encoding circuits reduce out-of-sequence errors, and ensure excellent metastable performance of only one error per 1016 clock cycles. In addition, the MAX107 provides LVDS digital outputs with an internal 6:12 demultiplexer that reduces the output data rate to one-half the sample clock rate. Data is output in two's complement format. The MAX107 operates from a +5V analog supply and the LVDS output ports operate at +3.3V. The data converter's typical power dissipation is 2.6W. The device is packaged in an 80-pin, TQFP package with exposed paddle, and is specified for the extended (-40°C to +85°C) temperature range. For a higher-speed, 800Msps version of the MAX107, please refer to the MAX105 data sheet.

Key Features
  • Two Matched 6-Bit, 400Msps ADCs
  • Excellent Dynamic Performance
    • 36.7dB SINAD at fIN ≈ 125MHz and
    • fCLK ≈ 400MHz
  • Typical INL and DNL: ±0.25LSB
  • Channel-to-Channel Phase Matching: ±0.2°
  • Channel-to-Channel Gain Matching: ±0.04dB
  • 6:12 Demultiplexer reduces the Data Rates to 200MHz
  • Low Error Rate: 1016 Metastable States at 400Msps
  • LVDS Digital Outputs in Two's Complement Format
MAX107: Block Diagram
MAX107: Block Diagram
Applications/Uses
  • Communication Systems
  • Test Instrumentation
  • VSAT Receivers
  • Wireless Local Area Networks (WLANs)
DataSheet
titleDownload file
MAX107 Data SheetMAX107.pdf
Parametrics
Part NumberInput Chan.Resolution
(bits)
Sample Rate
(Msps)
AC Specs
(MHz)
SFDR
(dBc)
ENOB
(bits)
SINAD
(dB)
SNR
(dB)
THD
(dB)
DNL
(±LSB)
INL
(±LSB)
Full Pwr. BW
(MHz)
ICC
(mA)
Data Bus InterfacePackage/PinsBudgetary
Price
max ≥@ fINminminmintypSee Notes
MAX10726400125515.936.737-49.50.250.2400650µP/8
Demuxed
LVPECL
TQFP-EP/80$29.25 @1k
Related Products
  • MAX105:Dual, 6-Bit, 800Msps ADC with On-Chip, Wideband Input Amplifier
  • MAX108:±5V, 1.5Gsps, 8-Bit, Ultra High-Speed, A to D Converter with On-Chip 2.2GHz Track/Hold Amplifier
  • MAX106:±5V, 600Msps, 8-Bit ADC with On-Chip 2.2GHz Bandwidth Track/Hold Amplifier
  • MAX104:±5V, 1Gsps, 8-Bit ADC with On-Chip 2.2GHz Track/Hold Amplifier
  • MAX1002:Low-Power, 60Msps, Dual, 6-Bit ADC
  • MAX1003:Low-Power, 90Msps, Dual 6-Bit ADC
Ordering Information
Part NumberStatusRecommended ReplacementPackageTempRoHS
MAX107ECS+ActiveTQFP-EP,;80 pin;196 mm²-40°C to +85°CLead Free
MAX107ECS+TActiveTQFP;-40°C to +85°CSee data sheet
MAX107ECS-DNo Longer AvailableMAX107ECS+TQFP;80 pin-40°C to +85°CSee data sheet
MAX107ECS-TDNo Longer AvailableMAX107ECS+TQFP;80 pin-40°C to +85°CSee data sheet
MAX107.pdf MAX107
Design a Low-Jitter Clock for High-Speed Data Converters MAX2620
MAX107.pdf MAX107