MAX1127:Quad, 12-Bit, 65Msps, 1.8V ADC with Serial LVDS Outputs

The MAX1127 quad, 12-bit analog-to-digital converter (ADC) features fully differential inputs, a pipelined architecture, and digital error correction. This ADC is optimized for low-power, high-dynamic performance for medical imaging, communications, and instrumentation applications. The MAX1127 operates from a 1.7V to 1.9V single supply and consumes only 563mW while delivering a 69.6dB signal-to-noise ratio (SNR) at a 19.3MHz input frequency. In addition to low operating power, the MAX1127 features a 675µA power-down mode for idle periods. An internal 1.24V precision bandgap reference sets the ADC's full-scale range. A flexible reference structure allows the use of an external reference for applications requiring increased accuracy or a different input voltage range. A single-ended clock controls the conversion process. An internal duty-cycle equalizer allows for wide variations in input-clock duty cycle. An on-chip phaselocked loop (PLL) generates the high-speed serial low-voltage differential signaling (LVDS) clock. The MAX1127 provides serial LVDS outputs for data, clock, and frame alignment signals. The output data is presented in two's complement or binary format. Refer to the MAX1126 data sheet for a pin-compatible 40Msps version of the MAX1127. The MAX1127 is available in a small, 10mm x 10mm x 0.9mm, 68-pin QFN package with exposed paddle and is specified for the extended industrial (-40°C to +85°C) temperature range.

Key Features
  • Four ADC Channels with Serial LVDS/SLVS Outputs
  • Excellent Dynamic Performance
    • 69.6dB SNR at fIN = 19.3MHz
    • 92dBc SFDR at fIN = 19.3MHz
    • -87dB Channel Isolation
  • Ultra-Low Power
    • 135mW per Channel (Normal Operation)
    • 1.2mW Total (Shutdown Mode)
  • Accepts 20% to 80% Clock Duty Cycle
  • Self-Aligning Data-Clock to Data-Output Interface
  • Fully Differential Analog Inputs
  • Wide ±1.4VP-P Differential Input Voltage Range
  • Internal/External Reference Option
  • Test Mode for Digital Signal Integrity
  • LVDS Outputs Support Up to 30in FR-4 Backplane Connections
  • Small, 68-Pin QFN with Exposed Paddle
  • Evaluation Kit Available (MAX1127EVKIT)
MAX1127: Functional Diagram
MAX1127: Functional Diagram
Applications/Uses
  • Instrumentation
  • Multichannel Communication Systems
  • Positron Emission Tomography (PET) Imaging
  • Ultrasound and Medical Imaging
DataSheet
titleDownload file
MAX1127 Data SheetMAX1127.pdf
Parametrics
Part NumberInput Chan.Resolution
(bits)
Sample Rate
(Msps)
AC Specs
(MHz)
SFDR
(dBc)
ENOB
(bits)
SINAD
(dB)
SNR
(dB)
THD
(dB)
DNL
(±LSB)
INL
(±LSB)
Full Pwr. BW
(MHz)
ICC
(mA)
Data Bus InterfacePackage/Pins
max ≥@ fINminminmintyp
MAX11274126519.329211.469.569.6-910.250.4100313LVDS
Serial
QFN/68
Design kits & evaluation modules
Quality and Environmental Data
Related Products
  • MAX1126:Quad, 12-Bit, 40Msps, 1.8V ADC with Serial LVDS Outputs
Ordering Information
Part NumberStatusRecommended ReplacementPackageTempRoHS
MAX1127EGK+DActiveQFN,;68 pin;100 mm²-40°C to +85°CLead Free
MAX1127EGK+TDActiveQFN,;68 pin;100 mm²-40°C to +85°CLead Free
MAX1127EGK-DNo Longer AvailableMAX1127EGK+DQFN,;68 pin;100 mm²-40°C to +85°CNo
MAX1127EGK-TDNo Longer AvailableMAX1127EGK+DQFN;68 pin-40°C to +85°CSee data sheet
MAX1127.pdf MAX1127
MAX1127.pdf MAX1127
MAX1127.pdf MAX1127
Coherent Sampling Calculator (CSC) MAX19588
MAX1127.pdf MAX1127
MAX1127.pdf MAX1127