MAX34565EVKIT：Evaluation Kit for the MAX34565
The MAX34565 evaluation kit (EV kit) simplifies evaluation of the MAX34565 12V hot-plug switch. The EV kit is shipped with a 15Ω current-limit resistor (R2) installed, but this value can be changed from 12Ω to 30Ω to match the application. The EV kit is also shipped with a Kelvin current-sense arrangement, but this can be changed to a direct current-sense arrangement by adding a 0Ω jumper in the R3 position.
Note: The PCB used for the MAX34565 EV kit also supports the MAX34564. The two devices share the same footprint. The PCB silkscreen shows the MAX34564, but if a white label exists on the top side of the PCB, the MAX34565, not the MAX34564, is mounted on the board.
Key Features- Quick Evaluation of the MAX34565
- Fully Assembled and Tested
- Ready for Operation Out of the Box
- Adjustable Current Threshold
- Supports Both Kelvin and Direct Current Sensing
- Labeled Test Points for Key Signals
- PCB Mounting Holes
| Applications/Uses- Base Stations
- InfiniBand™/SM
- PCI/PCI Express®
- RAID/Hard Drives
- Servers
- Switches/Routers
|
DataSheet
Ordering Information
| Part Number | Status | Recommended Replacement | Package |
|---|
| MAX34565EVKIT# | Active | | EVKIT; |
