MAX4390:Ultra-Small, Low-Cost, 85MHz Op Amps with Rail-to-Rail Outputs and Disable

The MAX4389/MAX4390/MAX4392–MAX4396 family of op amps are unity-gain stable devices that combine high-speed performance, rail-to-rail outputs, and disable mode. These devices are targeted for applications where an input or an output is exposed to the outside world, such as video and communications. The MAX4389/MAX4390/MAX4392–MAX4396 operate from a single 4.5V to 11V supply or from dual ±2.25V to ±5.5V supplies. The common-mode input voltage range extends to the negative power-supply rail (ground in single-supply applications). The MAX4389/MAX4390/MAX4392–MAX4396 consume only 5.5mA of quiescent supply current per amplifier while achieving a 85MHz -3dB bandwidth, 27MHz 0.1dB gain flatness, and a 500V/µs slew rate. Disable mode sets the outputs to high impedance while consuming only 450µA of current. The MAX4389 single, MAX4393 dual, MAX4394 triple, and MAX4396 quad include disable capabilities. The MAX4389 and MAX4390 are available in ultra-small, 6-pin SC70 packages.

Key Features
  • Low Cost
  • High Speed
    • 85MHz -3dB Bandwidth
    • 27MHz 0.1dB Gain Flatness
    • 500V/µs Slew Rate
  • Single 4.5V to 11V or Dual ±2.25V to ±5.5V Operation
  • Rail-to-Rail Outputs
  • Input Common-Mode Range Extends to VEE
  • Low Differential Gain/Phase: 0.015%/0.015°
  • Low Distortion at 5MHz
    • -59dBc Spurious-Free Dynamic Range
  • High Output Drive: ±50mA
  • 450µA Disable Capability (MAX4389/MAX4393/MAX4394/MAX4396)
  • Space-Saving SC70, SOT23, µMAX®, or TSSOP Packages
MAX4389, MAX4390, MAX4392, MAX4393, MAX4394, MAX4395, MAX4396: Typical Operating Circuit
MAX4389, MAX4390, MAX4392, MAX4393, MAX4394, MAX4395, MAX4396: Typical Operating Circuit
Applications/Uses
  • Analog-to-Digital Converter Interface
  • CCD Imaging Systems
  • Digital Cameras
  • Set-Top Boxes
  • Surveillance Video Systems
  • Video Line Driver
  • Video-on-Demand
DataSheet
titleDownload file
MAX4389-MAX4396 Data SheetMAX4389-MAX4396.pdf
Parametrics
Part NumberAmps.Single SupplyBW
(MHz)
Large Signal BW
(MHz)
ISUPPLY
(mA)
IOUT
(mA)
Slew Rate
(V/µs)
en
(nV/√Hz)
AVVSUPPLY
(V)
VSUPPLY
(V)
Oper. Temp.
(°C)
Package/PinsBudgetary
Price
@ -3dBtypmin<minminmaxSee Notes
MAX43891Yes85806505001314.511-40 to +85SC-70/6
SOT/6
$0.98 @1k
MAX43901SC-70/6
SOT/5
$0.79 @1k
MAX43922µMAX/8
SOIC(N)/8
$1.04 @1k
MAX43932µMAX/10$1.11 @1k
MAX43943SOIC(N)/14
TSSOP/14
$1.35 @1k
MAX43954SOIC(N)/14
TSSOP/14
$1.54 @1k
MAX43964TSSOP/20$1.68 @1k
Quality and Environmental Data
Related Products
  • MAX4380:Ultra-Small, Low-Cost, 210MHz, Single-Supply Op Amps with Rail-to-Rail Outputs and Disable
  • MAX4383:Ultra-Small, Low-Cost, 210MHz, Single-Supply Op Amps with Rail-to-Rail Outputs and Disable
  • MAX4384:Ultra-Small, Low-Cost, 210MHz, Single-Supply Op Amps with Rail-to-Rail Outputs and Disable
  • MAX4381:Ultra-Small, Low-Cost, 210MHz, Single-Supply Op Amps with Rail-to-Rail Outputs and Disable
  • MAX4382:Ultra-Small, Low-Cost, 210MHz, Single-Supply Op Amps with Rail-to-Rail Outputs and Disable
  • MAX4451:Ultra-Small, Low-Cost, 210MHz, Single-Supply Op Amps with Rail-to-Rail Outputs
  • MAX4450:Ultra-Small, Low-Cost, 210MHz, Single-Supply Op Amps with Rail-to-Rail Outputs
Ordering Information
Part NumberStatusRecommended ReplacementPackageTempRoHS
MAX4390EUK+ActiveSOT,;5 pin;9 mm²-40°C to +85°CLead Free
MAX4390EUK+TActiveSOT,;5 pin;9 mm²-40°C to +85°CLead Free
MAX4390EUK+TG126ActiveSOT,;5 pin;9 mm²-40°C to +85°CLead Free
MAX4390EUK-TNo Longer AvailableMAX4390EUK+TSOT,;5 pin;9 mm²-40°C to +85°CNo
MAX4390EXTNo Longer AvailableMAX4390EXT+SC-70,;6 pin;5.3 mm²-40°C to +85°CNo
MAX4390EXT+ActiveSC-70,;6 pin;5.3 mm²-40°C to +85°CLead Free
MAX4390EXT+TActiveSC-70,;6 pin;5.3 mm²-40°C to +85°CLead Free
MAX4390EXT-TActiveSC-70,;6 pin;5.3 mm²-40°C to +85°CNo
MAX4389-MAX4396.pdf MAX4396
5MHz, 3-Pole, Low-Pass Filter plus Video Line Driver for Consumer Video Applications MAX4390
MAX4390.pdf MAX4390