MAXPMBAE:Maxim Analog Essentials Collection of Peripheral Modules

15 Plug-In Modules Quickly Connect your FPGA to the Analog World

Maxim Analog Essentials is a collection of peripheral modules which can plug directly into any FPGA/CPU expansion port which follows the Pmod™ standard established by Digilent, Inc. The collection includes modules containing a wide variety of commonly used analog and mixed signal functions. The modules are supported by software which includes FPGA configuration files for three popular FPGA platforms: Avnet LX-9, Digilent Nexys 3 and Avnet ZEDBoard, as well as example programs to exercise and demonstrate each module. While the example programs demonstrate the module’s functionality, they are well partitioned and documented allowing the core routines to be easily cut and pasted into your own programs. The combination of plug-in simplicity and easy software integration allows for quick migration from idea to working prototype.

Key Features
  • Data Converter, Interface, Clock, Sensor, and Other Modules Included to Address Many Design Needs
  • Plug in Modules Enable Rapid Hardware Prototyping
  • Proven Software Drivers Reduce Development Time
  • FPGA Configuration Files Included to Simplify Design Effort
Related Products
  • MAX14850:Six-Channel Digital Isolator
  • MAX5825:Ultra-Small, Octal Channel, 8-/10-/12-Bit Buffered Output DACs with Internal Reference and I2C Interface
  • MAX44000:Ambient and Infrared Proximity Sensor
  • MAX7304:I²C-Interfaced 16-Port, Level-Translating GPIO and LED Driver with High Level of Integrated ESD Protection
  • MAX31855:Cold-Junction Compensated Thermocouple-to-Digital Converter
  • MAX44009:Industry's Lowest-Power Ambient Light Sensor with ADC
  • MAX5216:14-/16-Bit, Low-Power, Buffered Output, Rail-to-Rail DACs with SPI Interface
  • MAX31723:Digital Thermometers and Thermostats with SPI/3-Wire Interface
  • MAX9611:High-Side, Current-Sense Amplifiers with 12-Bit ADC and Op Amp/Comparator
  • MAX11205:16-Bit, Single-Channel, Ultra-Low Power, Delta-Sigma ADC with 2-Wire Serial Interface
  • MAX4824:+3.3V/+5V, 8-Channel, Relay Drivers with Fast Recovery Time and Power-Save Mode
  • DS3231:Extremely Accurate I²C-Integrated RTC/TCXO/Crystal
  • MAX5487:Dual, 256-Tap, Nonvolatile, SPI-Interface, Linear-Taper Digital Potentiometers
  • DS1086:Spread-Spectrum EconOscillator
  • MAX3232:3.0V to 5.5V, Low-Power, up to 1Mbps, True RS-232 Transceivers Using Four 0.1µF External Capacitors
Ordering Information
Part NumberStatusRecommended ReplacementPackage
MAXPMBAE1#ActiveEVKIT;
Analog Essentials Getting Started Guide for Zedboard MAXPMBAE
Analog Essentials Getting Started Guide for LX9 and Nexys3 MAXPMBAE