BTLC1000-MR110CA

The BTLC1000-MR110CA is an ultra-low power Bluetooth® SMART (BLE 4.1) module with Integrated Transceiver, Modem, MAC, PA, TR Switch, and Power Management Unit (PMU). It can be used as a Bluetooth Low Energy link controller or data pump with external host MCU

The qualified Bluetooth Smart protocol stack is stored in dedicated ROM, the firmware includes L2CAP service layer protocols, Security Manager, Attribute protocol (ATT), Generic Attribute Profile (GATT),and the Generic Access Profile (GAP). Additionally, application profiles such as Proximity, Thermometer, Heart Rate, Blood Pressure and many others are supported and included in the protocol stack.

The module contains all circuitry required including a ceramic high gain antenna, 26MHz crystal,and PMU circuitry. The customer simply needs to place the module on his board and provide power and a 32KHz Real Time Clock or crystal.

The fully-certified BTLC1000-MR110CA module is available now for purchase.  For more information on the BTLC1000 SoC, please visit the .







Features
  • Ultra-low power Bluetooth SMART (BLE 4.1) module
  • Lowest BLE power consumption in industry
  • Small form factor (12.70 X 20.15 mm)
  • Integrated chip antenna
  • Optimized system cost - high level of integration on chip reduces external Bill of Material significantly
  • Wide operating voltage range:  1.8 – 4.3V
  • Parameter host interface:  UART
  • Fully-certified (FCC, ETSI/CE, TELEC)
  • RoHS compliant
  • BTLC1000 SoC available in small QFN or WLCSP package
Parameter
Parameter Name Value Value
Bluetooth Low Energy Yes Yes
FCC Certified Yes Yes
I2C 2 2
SPI Yes Yes
Memory Type ROM ROM
GPIO 15 15
Pin Count 24 24
Package Type Surface mount module Surface mount module
Package Size 12.70 x 20.15 mm 12.70 x 20.15 mm
Min Temp Range -40C -40C
Max Temp Range 85C 85C
Op Voltage Min 1.8V 1.8V
Op Voltage Max 4.3V 4.3V
Documents