MCP2562

The MCP2561/2 is Microchip Technology Inc. second generation high-speed CAN transceiver. It serves as an interface between a CAN protocol controller and the physical two-wire CAN bus. The device meets the automotive requirements for high-speed (1 Mb/s), low quiescent current, electromagnetic compatibility (EMC) and electrostatic discharge (ESD). The device family members are: • MCP2561 with SPLIT pin • MCP2562 with VIO pin

Features
  • Supports 1 Mb/s operation
  • Implements ISO-11898-5 standard physical layerrequirements
  • AEC-Q100 Grade 0
  • Very low standby current (Typ: 5µA)
  • VIO supply pin (MCP2562) to interface directly to CAN controllers and microcontrollers with 1.8V to 5V I/O
  • SPLIT output pin (MCP2561) to stabilize common mode in biased split termination schemes
  • CAN bus pins are disconnected when device is unpowered. An unpowered node or brown-out event will not load the CAN bus
  • Detection of ground fault; Permanent dominant detection on TXD, Permanent dominant detection on bus
  • Power-on Reset and voltage brown-out protectionon VDD and VIO pin
  • Protection against damage due to short-circuitconditions (positive or negative battery voltage)
  • Protection against high-voltage transients in automotive environments
  • Automatic Thermal Shutdown protection
  • Suitable for 12V and 24V systems
  • Up to 112 nodes can be connected
  • High-noise immunity due to differential bus implementation
  • High ESD protection on CANH and CANL, IEC61000-4-2 > 8kV
  • Available in PDIP-8L, SOIC-8L and 3x3 DFN-8L.
  • Temperature ranges; Extended (E): -40°C to +125°C, High (H): -40°C to +150°C
Parameter
Parameter Name Value Value
Temp. Range (°C) -40 to 150 -40 to 150
Operating Voltage Range (V) 4.5 to 5.5 4.5 to 5.5
Documents
MCP2561/2 Data SheetData Sheets07/14/2014781KB
Ordering Information
Part NumberLeadsPackage TypeTemp RangePacking1+26+100+1000+5000+
MCP2562-E/MF8DFN-40C to +125CTUBE0.930.780.710.680.67
MCP2562-E/P8PDIP-40C to +125CTUBE0.930.780.710.680.67
MCP2562-E/SN8SOIC-40C to +125CTUBE0.900.750.680.660.65
MCP2562-H/MF8DFN-40C to >+125CTUBE1.010.840.760.740.73
MCP2562-H/P8PDIP-40C to >+125CTUBE1.010.840.760.740.73
MCP2562-H/SN8SOIC-40C to >+125CTUBE0.980.820.740.720.71
MCP2562T-E/MF8DFN-40C to +125CT/R0.930.780.710.680.67
MCP2562T-E/SN8SOIC-40C to +125CT/R0.900.750.680.660.65
MCP2562T-H/MF8DFN-40C to >+125CT/R1.010.840.760.740.73
MCP2562T-H/SN8SOIC-40C to >+125CT/R0.980.820.740.720.71
RoHS Information
PartNumberDeviceWeightShippingWeightLeadCountPackageTypePackageWidthSolderCompositionJEDECIndicatorRoHSChinaEFUP
MCP2562-H/P0.4867000.9000008PDIP.300inMatte Tine3
MCP2562-E/P0.4867000.9000008PDIP.300inMatte Tine3
MCP2562FD-E/P0.4867000.9000008PDIP.300inMatte Tine3
MCP2562FD-H/P0.4867000.9000008PDIP.300inMatte Tine3
MCP2562-E/SN0.0780000.1600008SOIC.150In(3.90mm)Matte Tine3
MCP2562T-E/SN0.0780000.2303038SOIC.150In(3.90mm)Matte Tine3
MCP2562-H/SN0.0780000.1600008SOIC.150In(3.90mm)Matte Tine3
MCP2562T-H/SN0.0780000.2303038SOIC.150In(3.90mm)Matte Tine3
MCP2562FDT-E/SN0.0780000.2303038SOIC.150In(3.90mm)Matte Tine3
MCP2562FD-E/SN0.0780000.1600008SOIC.150In(3.90mm)Matte Tine3
MCP2562FDT-H/SN0.0780000.2303038SOIC.150In(3.90mm)Matte Tine3
MCP2562FD-H/SN0.0780000.1600008SOIC.150In(3.90mm)Matte Tine3
MCP2562T-E/SNVAO0.0780000.2303038SOIC.150In(3.90mm)Matte Tine3
MCP2562-E/SNVAO0.0780000.1600008SOIC.150In(3.90mm)Matte Tine3
MCP2562-E/MF0.0238000.0416678DFN3x3x0.9mmMatte Tine3
MCP2562T-E/MF0.0238000.1727278DFN3x3x0.9mmMatte Tine3
MCP2562-H/MF0.0238000.0416678DFN3x3x0.9mmMatte Tine3
MCP2562T-H/MF0.0238000.1727278DFN3x3x0.9mmMatte Tine3
MCP2562FD-E/MF0.0238000.0416678DFN3x3x0.9mmMatte Tine3
MCP2562FDT-E/MF0.0238000.1727278DFN3x3x0.9mmMatte Tine3
MCP2562FD-H/MF0.0238000.0416678DFN3x3x0.9mmMatte Tine3
MCP2562FDT-H/MF0.0238000.1727278DFN3x3x0.9mmMatte Tine3
MCP2562-E/MFVAO0.0238000.0416678DFN3x3x0.9mmMatte Tine3
MCP2562T-E/MFVAO0.0238000.1727278DFN3x3x0.9mmMatte Tine3
MCP25625-E/ML0.1016000.16393428QFN6x6x0.9mmMatte Tine3
MCP25625T-E/ML0.1016000.33250028QFN6x6x0.9mmMatte Tine3
MCP25625-E/SS0.2292000.48936228SSOP.209inMatte Tine3
MCP25625T-E/SS0.2292000.33333328SSOP.209inMatte Tine3
MCP2561/2 Data Sheet MCP2562