MCP4532

The MCP453X devices are single channel, volatile, 7-bit (129 wiper steps) digital potentiometers with an I2C compatible interface. The MCP453X family is available with end-to-end resistor values of 5KΩ, 10KΩ, 50kΩ and 100KΩ. These devices offer a variety of configurations simplifying design while minimizing cost, package size and pin count.

Features
  • Single Resistor Network
  • Potentiometer or Rheostat configuration options
  • Resistor Network Resolution: 7-bit: 128 Resistors (129 Steps)
  • 7-bit: 128 Resistors (129 Steps)
  • Four RAB Resistances options: 5kΩ 10kΩ 50kΩ 100kΩ
  • 5kΩ
  • 10kΩ
  • 50kΩ
  • 100kΩ
  • Zero-scale to Full-scale Wiper Operation
  • Low Wiper Resistance – 75 Ω typical
  • Low Tempco: Absolute (Rheostat) – 50 ppm typical (0°-70°C) Ratiometric (Potentiometer) – 15 ppm typical
  • Absolute (Rheostat) – 50 ppm typical (0°-70°C)
  • Ratiometric (Potentiometer) – 15 ppm typical
  • I2C™Compatible Serial Interface Support: 100 kHz 400 kHz 3.4 MHz
  • 100 kHz
  • 400 kHz
  • 3.4 MHz
  • Brown-out Reset Protection – 1.5V typical
  • Serial Interface Inactive Current – 2.5 uA typical
  • High-Voltage Tolerant Digital Inputs Up to 12.5V
  • Wide Operating Voltage: 2.7V to 5.5V - Device Characteristics Specified 1.8V to 5.5V - Device Operation
  • 2.7V to 5.5V - Device Characteristics Specified
  • 1.8V to 5.5V - Device Operation
  • Wide Bandwidth (-3 dB) Operation – 2 MHz typical for 5.0 Ω Device
  • Extended Temperature Range (-40°C to +125°C)
  • AEC-Q100 Grade 1 quarlified
Parameter
Parameter Name Value Value
Temp. Range (°C) -40 to +125 -40 to +125
Volatile / Non Volatile Volatile Volatile
Number of Taps 129 129
Resistance (ohms) K 5, 10, 50, 100 5, 10, 50, 100
# per Package 1 1
INL (Max) 0.8 0.8
DNL (Max) 0.375 0.375
Interface I²C™ I²C™
Documents
MCP453X/455X/463X/465X -7/8-Bit Single/Dual I2C Digital POT with Volatile MemoryData Sheets02/22/20133335KB
AN1080 - Understanding Digital Potentiometers Resistor VariationsAppNote07/27/2009565KB
AN1316 - Using Digital Potentiometers for Programmable Amplifier GainAppNote04/14/2010441KB
AN219 - Comparing Digital Potentiometers to Mechanical PotentiometersAppNote11/20/2000133KB
AN691 - Optimizing the Digital Potentiometer in Precision CircuitsAppNote05/08/2001240KB
AN692 - Using a Digital Potentiometer to Optimize a Precision Single Supply Photo DetectAppNote02/23/2001253KB
AN737 - Using Digital Potentiometers to Design Low Pass Adjustable FiltersAppNote02/24/2004277KB
Automotive Recommended Product Selector GuideBrochures09/16/20147598KB
Signal Chain Design GuideBrochures11/10/20123229KB
Digital Potentiometer Design GuideDesign Guides01/03/2011706KB
Analog & Interface Product Selector GuideProduct Line Card03/21/20164116KB
Ordering Information
Part NumberLeadsPackage TypeTemp RangePacking1+26+100+1000+5000+
MCP4532-103E/MS8MSOP-40C to +125CTUBE0.670.560.510.490.48
MCP4532-104E/MS8MSOP-40C to +125CTUBE0.670.560.510.490.48
MCP4532-502E/MS8MSOP-40C to +125CTUBE0.670.560.510.490.48
MCP4532-503E/MS8MSOP-40C to +125CTUBE0.670.560.510.490.48
MCP4532T-103E/MF8DFN-40C to +125CT/R0.670.560.510.490.48
MCP4532T-103E/MS8MSOP-40C to +125CT/R0.670.560.510.490.48
MCP4532T-104E/MF8DFN-40C to +125CT/R0.670.560.510.490.48
MCP4532T-104E/MS8MSOP-40C to +125CT/R0.670.560.510.490.48
MCP4532T-502E/MF8DFN-40C to +125CT/R0.670.560.510.490.48
MCP4532T-502E/MS8MSOP-40C to +125CT/R0.670.560.510.490.48
MCP4532T-503E/MF8DFN-40C to +125CT/R0.670.560.510.490.48
MCP4532T-503E/MS8MSOP-40C to +125CT/R0.670.560.510.490.48
相关开发工具
RoHS Information
PartNumberDeviceWeightShippingWeightLeadCountPackageTypePackageWidthSolderCompositionJEDECIndicatorRoHSChinaEFUP
MCP4532-502E/MS0.0256000.0700008MSOP3x3mmMatte Tine3
MCP4532-104E/MS0.0256000.0700008MSOP3x3mmMatte Tine3
MCP4532T-104E/MS0.0256000.2156008MSOP3x3mmMatte Tine3
MCP4532T-502E/MS0.0256000.2156008MSOP3x3mmMatte Tine3
MCP4532-103E/MS0.0256000.0700008MSOP3x3mmMatte Tine3
MCP4532T-103E/MS0.0256000.2156008MSOP3x3mmMatte Tine3
MCP4532T-503E/MS0.0256000.2156008MSOP3x3mmMatte Tine3
MCP4532-503E/MS0.0256000.0700008MSOP3x3mmMatte Tine3
MCP4532T-502E/MF0.0238000.1727278DFN3x3x0.9mmMatte Tine3
MCP4532T-103E/MF0.0238000.1727278DFN3x3x0.9mmMatte Tine3
MCP4532T-503E/MF0.0238000.1727278DFN3x3x0.9mmMatte Tine3
MCP4532T-104E/MF0.0238000.1727278DFN3x3x0.9mmMatte Tine3
MCP453X/455X/463X/465X -7/8-Bit Single/Dual I2C Digital POT with Volatile Memory MCP4662
MCP453X/455X/463X/465X -7/8-Bit Single/Dual I2C Digital POT with Volatile Memory MCP46XXEV
AN1080 MCP46XXEV
AN1316 MCP46XXEV
AN1316 Excel Files MCP46XXEV
AN219 MCP4651
AN691 MCP4662
AN692 MCP4651
AN737 MCP4662
Automotive Recommended Product Selector Guide MCP23S09
Signal Chain Design Guide MCP3901
Digital Potentiometer Design Guide SOIC8EV
Analog & Interface Product Selector Guide ENC624J600