MIC2785
The MIC2785 is a micropower voltage monitor that provides undervoltage monitoring and manual reset capability in a tiny 1.2mm x 1.2mm QFN package. The MIC2785 provides a monitored voltage input (VIN) separate from the supply input (VDD). This ensures that the reset (/RST) output maintains a valid output state when the voltage being monitored ramps up or down. The device also includes a manual reset input (/MR). The /RST output is an active low push-pull output.
The undervoltage detector compares the VIN pin voltage against the factory-programmed threshold of 1.62V. The reset output is asserted any time the input voltage drops below the programmed threshold voltage. A reset can be generated at any time by asserting the manual reset input, /MR. This reset output will remain active until the release of /MR. The /MR input can also be used to daisy-chain the MIC2785 onto existing power monitoring circuitry or other supervisors. Hysteresis is included to prevent chattering due to noise.
The MIC2785 consumes a minimum of quiescent current, only 5µA, 1.5µA from the main supply pin and 3.5µA from the input pin. Offered in a tiny space saving 6-pin QFN 1.2mm x 1.2mm package.
Features- No external components
- Monitors input voltage for undervoltage condition
- Separate inputs for supply (VDD) and monitor (VIN)
- ±1.5% VIN threshold voltage accuracy
- Valid /RST state with VIN down to 0.0V
- Valid /RST state with VDD down to 1.20V
- Factory-programmed 1.62V reference
- Manual reset input (/MR)
- Active low RESET (/RST) output
- Ultra-low input current - 5µA total (VIN and VDD)
- Rejects brief input transients
- -40°C to 85°C operating temperature range
- RoHS lead-free compliant
- Available in tiny 6-pin 1.2mm x 1.2mm Thin QFN package
| Parameter|
Parameter Name
Value
| Value | |
Manual Reset
Yes
|
Yes
| |
Reset Type
Active-Low Push-Pull
|
Active-Low Push-Pull
| |
Typical Supply Current (uA)
4
|
4
| |
Nominal Reset Voltage (V)
1.62
|
1.62
| |
Product Type
Single Voltage Monitor
|
Single Voltage Monitor
|
|
Documents
RoHS Information
| PartNumber | DeviceWeight | ShippingWeight | LeadCount | PackageType | PackageWidth | SolderComposition | JEDECIndicator | RoHS | ChinaEFUP |
|---|
| MIC2785-16YFT-TR | | 0.081358 | 6 | UQFN | 1.2x1.2x0.6mm | NiPDAu | e4 |  |  |
