MIC4224

The MIC4223/MIC4224/MIC4225 are a family of a dual 4A, high-speed, low-side MOSFET drivers with logic-level driver enables. The devices are fabricated on Micrel's Bipolar/CMOS/DMOS (BCD) process and operate from a 4.5V to 18V supply voltage. The devices parallel Bipolar and CMOS output stage architecture provides high current throughout the MOSFETs Miller Region allowing the driver to sink and source 4A of peak current from a 12V supply and quickly charge and discharge a 2000pF load capacitance in under 15ns, while allowing the outputs to swing within 0.3V of V DD and 0.16V of ground. The MIC4223/MIC4224/MIC4225 driver and enable inputs feature TTL and CMOS logic-level thresholds which are independent of supply voltage. Each driver features a dedicated active-high enable input which is internally pulled high to VDD through 100kΩ, allowing the pins to be left unconnected if it is not required to disable the driver outputs. The driver inputs have been designed to protect against ground bounce and are protected to withstand -5V of voltage swing at -40mA. Driver outputs are also protected to withstand 500mA of reverse current. The MIC4223/MIC4224/MIC4225 are available in three configurations using industry standard pin out; dual inverting (MIC4223), dual non-inverting (MIC4224) and complimentary (MIC4225). They are available in 8-pin SOIC and thermally enhanced ePadD 8-pin MSOP and support operating junction temperatures from -40°C to +125°C.

Features
  • 4.5V to 18V supply voltage operating range
  • High peak source/sink current
  • ±3A at VDD = 8V
  • ±4A at VDD = 12V
  • 15ns/15ns rise and fall times with 2000pF load
  • 25ns/35ns (rising/falling) input propagation delay
  • 20ns/45ns (rising/falling) enable propagation delay
  • Active-high driver enable inputs with 100kΩ pull-ups
  • CMOS and TTL logic input and enable thresholds independent of supply voltage
  • Driver input protection to -5V at -40mA
  • Output latch-up protection to >500mA reverse current
  • Industry standard pin out with two package options
  • ePad MSOP-8 ( θJA = 60°C/W)
  • 8-pin SOIC ( θJA = 120°C/W)
  • Available in dual-inverting (MIC4223), dual non-inverting (MIC4224) and complementary (MIC4225)
  • Dual output drive by paralleling channels
  • -40°C to +125°C operating junction temperature range
Parameter
Parameter Name Value Value
MOSFET Driver Type Low Side Low Side
Driver Type Dual Dual
Configuration Non-Inverting Non-Inverting
Peak Output Current (source/sink, A) 4.0/4.0 4.0/4.0
Output Resistance (source/sink, Ω) 30/16 30/16
Maximum Supply Voltage (V) 18 18
Propagation Delay (Td1/Td2, ns) 25/35 25/35
Rise/Fall Time (Tr/Tf, ns) 15/15 15/15
Capacitive Load Drive 2000 pF in 15 ns 2000 pF in 15 ns
Features Enable pin Enable pin
Documents
MIC4223/4224/4225 Data SheetData Sheets11/05/2015509KB
Ordering Information
Part NumberLeadsPackage TypeTemp RangePacking1+26+100+1000+5000+
MIC4224YM8SOIC-40C to +125CTUBE**********
MIC4224YMME8MSOP-40C to +125CTUBE**********
MIC4224YMME-TR8MSOP-40C to +125CT/R1.401.161.060.880.82
MIC4224YM-TR8SOIC-40C to +125CT/R1.241.030.940.780.72
相关开发工具
RoHS Information
PartNumberDeviceWeightShippingWeightLeadCountPackageTypePackageWidthSolderCompositionJEDECIndicatorRoHSChinaEFUP
MIC4224YM0.0750000.1632658SOIC3.90mm(.150in)NiPdAue4
MIC4224YM-TR0.0750000.2500008SOIC3.90mm(.150in)NiPdAue4
MIC4224YMME-TR0.8050008MSOP3x3x1.0mmMatte Tine3
MIC4224YMME0.1246008MSOP3x3x1.0mmMatte Tine3
MIC4223/4224/4225 Data Sheet MIC4225