MIC5014

MIC5014 and MIC5015 MOSFET drivers are designed for gate control of N-channel, enhancement-mode, power MOSFETs used as high-side or low-side switches. The MIC5014/5 can sustain an on-state output indefinitely.

The MIC5014/5 operates from a 2.75V to 30V supply. In highside configurations, the driver can control MOSFETs that switch loads of up to 30V. In low-side configurations, with separate supplies, the maximum switched voltage is limited only by the MOSFET.

The MIC5014/5 has a TTL compatible control input. The MIC5014 is noninverting while the MIC5015 is inverting. The MIC5014/5 features an internal charge pump that can sustain a gate voltage greater than the available supply voltage. The driver is capable of turning on a logic-level MOSFET from a 2.75V supply or a standard MOSFET from a 5V supply. The gate-to-source output voltage is internally limited to approximately 15V.

The MIC5014/5 is protected against automotive load dump, reversed battery, and inductive load spikes of –20V. The driver’s overvoltage shutdown feature turns off the external MOSFET at approximately 35V to protect the load against power supply excursions.

The MIC5014 is an improved pin-for-pin compatible replacement in many MIC5011 applications. The MIC5014/5 is available in plastic 8-pin DIP and 8-pin SOIC pacakges.

Features
  • +2.75V to +30V operation
  • 100µA maximum supply current (5V supply)
  • 15µA typical off-state current
  • Internal charge pump
  • TTL compatible input
  • Withstands 60V transient (load dump)
  • Reverse battery protected to -20V
  • Inductive spike protected to -20V
  • Overvoltage shutdown at 35V
  • Internal 15V gate protection
  • Minimum external parts
  • Operates in high-side or low-side configurations
  • 1µA control input pull-off
  • Inverting and noninverting versions
Parameter
Parameter Name Value Value
MOSFET Driver Type High Side High Side
Driver Type High-Side or Low Side Single High-Side or Low Side Single
Configuration Non-Inverting Non-Inverting
Peak Output Current (source/sink, A) 800uA* 800uA*
Output Resistance (source/sink, Ω) n/a n/a
Maximum Supply Voltage (V) 30 30
Propagation Delay (Td1/Td2, ns) n/a n/a
Rise/Fall Time (Tr/Tf, ns) 90us/6us 90us/6us
Capacitive Load Drive 1000 pF in 90 µs 1000 pF in 90 µs
Features Withstands 60V transient and Reverse battery protected to –20V Withstands 60V transient and Reverse battery protected to –20V
Documents
MIC5014/5015Data Sheets11/05/2015515KB
Ordering Information
Part NumberLeadsPackage TypeTemp RangePacking1+26+100+1000+5000+
MIC5014YM8SOIC-40C to +85CTUBE2.161.801.641.371.26
MIC5014YM-TR8SOIC-40C to +85CT/R2.161.801.641.371.26
MIC5014YN8PDIP-40C to +85CTUBE2.612.181.981.651.52
RoHS Information
PartNumberDeviceWeightShippingWeightLeadCountPackageTypePackageWidthSolderCompositionJEDECIndicatorRoHSChinaEFUP
MIC5014YN0.4867000.9000008PDIP.300inMatte Tine3
MIC5014YM0.0750000.1632658SOIC3.90mm(.150in)NiPdAue4
MIC5014YM-TR0.0750000.2500008SOIC3.90mm(.150in)NiPdAue4
MIC5014/5015 MIC5015