MIC9130

The MIC9130 is a current-mode PWM controller that efficiently converts -48V telecom voltages to logic levels. The MIC9130 features a high voltage start-up circuit that allows the device to be connected to input voltages as high as 180V. The high input voltage capability protects the MIC9130 from line transients that are common in telecom systems. It also saves board space and simplifies designs by integrating several external components. The MIC9130 is capable of high speed operation. Typically the MIC9130 can control a sub-25ns pulse width on the gate out pin. its internal oscillator can operate over 2.5MHz, with even higher frequencies available through synchronisation. The high speed operation of the MIC9130 is made safe by the very fast, 34ns response from current sense to output, minimizing power dissipation in a fault condition. The MIC9130 allows for the designs of high efficiency power supplies. It can achieve efficiencies over 90% at high output currents. Its low 1.3mA quiescent current allows high efficiency even at light loads. The MIC9130 has a maximum duty cycle of 50%. For designs requiring a high duty cycle, refer to the MIC9131. The MIC9130 is available in a 16-pin SOP (small-outline package). The rated junction temperature range is from -40°C to +125°C.

Features
  • Input voltages up to 180V
  • Internal oscillator capable of >2.5MHz operation
  • Synchronization capability to 4MHz
  • Current sense delay of 34ns
  • Minimum pulse width <25ns
  • 90% efficiency
  • 1.3mA quiescent current
  • 1µA shutdown current
  • Soft-start
  • Resistor programmable current sense threshold
  • Selectable sort-start retry
  • 4Ω sink, 12Ω source output driver
  • Programmable under-voltage lockout
  • Constant-frequency PWM current-mode control
  • 16-pin SOIC and 16-pin QSO
Parameter
Parameter Name Value Value
Supported Topologies Forward,Flyback Forward,Flyback
Supported Outputs 1 1
Minimum Input Voltage (V) 9 9
Maximum Input Voltage (V) 180 180
Minimum Output Voltage (V) 4.85 4.85
Maximum Output Voltage (V) 4.85 4.85
Typical Tolerance (%) ±3 ±3
Duty Cycle Max (%) 0.5 0.5
Operating Frequency (Hz) Adj. to 2.5MHz Adj. to 2.5MHz
External Clock Sync True True
Soft Start True True
Internal Voltage Bias True True
Enable Pin True True
Current Limit / Short Circuit Protection True True
Input UVLO Typ (V) 1.22 1.22
Operating Supply Current (mA) 1.3 1.3
Iq Off (µA) 0.1 0.1
Package 16/SOP, 16/QSOP 16/SOP, 16/QSOP
Documents
MIC9130 Data SheetData Sheets11/09/2015251KB
MIC9130 Power Over Ethernet Evaluation BoardUser Guides11/11/2015756KB
Ordering Information
Part NumberLeadsPackage TypeTemp RangePacking1+26+100+1000+5000+
MIC9130YM16SOIC-40C to +125CTUBE3.092.572.342.262.24
MIC9130YQS16QSOP-40C to +125CTUBE**********
RoHS Information
PartNumberDeviceWeightShippingWeightLeadCountPackageTypePackageWidthSolderCompositionJEDECIndicatorRoHSChinaEFUP
MIC9130YM0.1574000.30000016SOIC.150inMatte Tine3
MIC9130YM-TR0.1574000.30769216SOIC.150inMatte Tine3
MIC9130YQS0.0836000.16000016QSOP3.90mm(.150in)Matte Tine3
MIC9130YQS-TR0.0836000.32000016QSOP3.90mm(.150in)Matte Tine3
MIC9130 Data Sheet MIC9130
MIC9130 Power Over Ethernet Evaluation Board MIC9130