74HC160D: Presettable synchronous BCD decade counter; asynchronous reset

The 74HC/HCT160 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A.

The 74HC/HCT160 are synchronous presettable decade counters which feature an internal look-ahead carry and can be used for high-speed counting.

Synchronous operation is provided by having all flip-flops clocked simultaneously on the positive-going edge of the clock (CP).

The outputs (Q0 to Q3) of the counters may be preset to a HIGH or LOW level. A LOW level at the parallel enable input (PE) disables the counting action and causes the data at the data inputs (D0 to D3) to be loaded into the counter on the positive-going edge of the clock (providing that the set-up and hold time requirements for PE are met). Preset takes place regardless of the levels at count enable inputs (CEP and CET).

A LOW level at the master reset input (MR) sets all four outputs of the flip-flops (Q0 to Q3) to LOW level regardless of the levels at CP, PE, CET and CEP inputs (thus providing an asynchronous clear function).

The look-ahead carry simplifies serial cascading of the counters. Both count enable inputs (CEP and CET) must be HIGH to count. The CET input is fed forward to enable the terminal count output (TC). The TC output thus enabled will produce a HIGH output pulse of a duration approximately equal to a HIGH level output of Q0. This pulse can be used to enable the next cascaded stage.

The maximum clock frequency for the cascaded counters is determined by the CP to TC propagation delay and CEP to CP set-up time, according to the following formula:

fmax= (1) / (tP (max)( CP to TC) + tSU(CEP to CP) )

sot109-1_3d
Application Notes (2)
Name/DescriptionModified Date
Live Insertion Aspects of Philips Logic Families (REV 1.0) PDF (73.0 kB) AN252 [English]13 Mar 2013
Pin FMEA 74HC/74HCT family (REV 1.0) PDF (51.0 kB) AN11044 [English]16 Mar 2011
Users Guides (1)
Name/DescriptionModified Date
HC/T User Guide (REV 1.0) PDF (508.0 kB) HCT_USER_GUIDE [English]01 Nov 1997
Package Information (1)
Name/DescriptionModified Date
plastic small outline package; 16 leads; body width 3.9 mm (REV 1.0) PDF (192.0 kB) SOT109-1 [English]08 Feb 2016
Supporting Information (2)
Name/DescriptionModified Date
Footprint for reflow soldering (REV 1.0) PDF (9.0 kB) SO-SOJ-REFLOW [English]08 Oct 2009
Footprint for wave soldering (REV 1.0) PDF (8.0 kB) SO-SOJ-WAVE [English]08 Oct 2009
Ordering Information
ProductStatusFamilyFunctionVCC (V)DescriptionOutput drive capability (mA)Package versionLogic switching levelstpd (ns)fmax (MHz)Power dissipation considerationsTamb (Cel)Rth(j-a) (K/W)Ψth(j-top) (K/W)Rth(j-c) (K/W)Package nameNo of pins
74HC160DActiveHC(T)BCD/decade counters2.0 - 6.0asynchronous reset+/- 5.2SOT109-1CMOS1855low-40~125601.017SO1616
Package Information
Product IDPackage DescriptionOutline VersionReflow/Wave SolderingPackingProduct StatusPart NumberOrdering code(12NC)MarkingChemical ContentRoHS / Pb Free / RHFLeadFree Conversion DateEFRIFR(FIT)MTBF(hour)MSLMSL LF
74HC160DSOT109-1SO-SOJ-REFLOW SO-SOJ-WAVE
SO-SOJ-REFLOW SO-SOJ-WAVE
Reel 13" Q1/T1 CECCActive74HC160D,653 (9337 145 10653)74HC160D74HC160Dweek 4, 200484.96.621.51E811
Bulk Pack, CECCActive74HC160D,652 (9337 145 10652)74HC160D74HC160Dweek 4, 200484.96.621.51E811
Live Insertion Aspects of Philips Logic Families 74HC_T_245_Q100
Pin FMEA 74HC/74HCT family 74HC_T_597_Q100
HC/T User Guide 74HCU04PW
plastic small outline package; 16 leads; body width 3.9 mm NPIC6C596A_Q100
Footprint for reflow soldering NPIC6C596A_Q100
Footprint for wave soldering NPIC6C596A_Q100
SA614A