NX3DV42: series based on data sheet NX3DV42
The NX3DV42 is a double-pole double-throw analog switch suitable for use as an analog or digital multiplexer/demultiplexer. Its wide bandwidth and low bit-to-bit skew allows the NX3DV42 to pass high-speed differential signals with good signal integrity. Its high channel to channel crosstalk rejection results in minimal noise interference. The bandwidth is wide enough to pass high-speed USB 2.0 differential signals (480 Mb/s). It consist of two switches, each with two independent input/outputs (HSDn+ and HSDn-) and a common input/output (D+ or D-). One digital inputs (S) is used to select the switch position. When pin OE is HIGH, the switches are turned off. Schmitt trigger action at the select input (S) and enable input (OE) makes the circuit tolerant to slower input rise and fall times across the entire VCC range from 3.0 V to 4.3 V.
sot1337-1_3d
Data Sheets (1)
| Name/Description | Modified Date |
|---|---|
| Dual high-speed USB 2.0 double-pole double-throw analog switch (REV 3.1) PDF (786.0 kB) NX3DV42 | 20 Oct 2016 |
Brochures (1)
| Name/Description | Modified Date |
|---|---|
| NXP® analog switches NX3 and NX5 families (REV 1.0) PDF (1.5 MB) 75017373 | 04 Mar 2013 |
Package Information (3)
| Name/Description | Modified Date |
|---|---|
| plastic, extremely thin quad flat package; no leads; 10 terminals (REV 1.0) PDF (207.0 kB) SOT1160-1 | 08 Feb 2016 |
| plastic extremely thin small outline package; no leads; 10 terminals; body 1.3 x 1.6 x 0.5 mm (REV 1.0) PDF (220.0 kB) SOT1337-1 | 08 Feb 2016 |
| plastic extremely thin small outline package; no leads; 10 terminals; body 1.6 x 1.3 x 0.33 mm (REV 1.0) PDF (174.0 kB) SOT1430-1 | 08 Feb 2016 |
Packing (2)
| Name/Description | Modified Date |
|---|---|
| X2QFN10; Reel sulfur barrier pack, SMD, 7" Q1/T1 standard product orientation Orderable part number ending ,471... (REV 1.0) PDF (221.0 kB) SOT1430-1_471 | 28 Apr 2015 |
| Standard product orientation 12NC ending 115 (REV 2.0) PDF (97.0 kB) SOT1160-1_115 | 04 Apr 2013 |
IBIS Model
- NX3DV42GU IBIS model (REV 1.0) ibs NX3DV42GU 11/15/2012
Ordering Information
| Product | Status | Description | Package version | Power dissipation considerations | RON (Ohm) | Function | Family | Xtalk (dB) | VCC (V) | Tamb (Cel) | RON(FLAT) (Ohm) | Configuration | Package name | Logic switching levels | f(-3dB) (MHz) | Ψth(j-top) (K/W) | Rth(j-a) (K/W) | THD (%) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| NX3DV42GM | Introduction Pending | Analog switches | SOT1049-3 | very low | 6.5 | USB2.0 double pole, double throw analog switch | NX3 | -30 | 3.0 - 4.3 | -40~85 | DPDT | XQFN10 | CMOS/LVTTL | 950 | ||||
| NX3DV42GU33 | Active | |||||||||||||||||
| NX3DV42GU10 | Active | Analog switches | SOT1337-1 | very low | 6.5 | USB2.0 double pole, double throw analog switch | NX3 | -30 | 3.0 - 4.3 | -40~85 | DPDT | XQFN10 | CMOS/LVTTL | 950 | ||||
| NX3DV42GU | Active | Analog switches | SOT1160-1 | very low | 6.5 | USB2.0 double pole, double throw analog switch | NX3 | -30 | 3.0 - 4.3 | -40~85 | DPDT | XQFN10 | CMOS/LVTTL | 950 | 48.0 | 142 |
Package Information
| Product ID | Package Description | Outline Version | Reflow/Wave Soldering | Packing | Product Status | Part NumberOrdering code(12NC) | Marking | Chemical Content | RoHS / Pb Free / RHF | LeadFree Conversion Date | MSL | MSL LF |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| NX3DV42GU |  | SOT1160-1 | Reel 7" Q1/T1 | Active | NX3DV42GU,115 (9352 945 71115) | x4 | NX3DV42GU |    | Always Pb-free | 1 | 1 | |
| NX3DV42GU10 | | SOT1337-1 | Reel 7" Q1/T1 | Active | NX3DV42GU10X (9352 996 57115) | x4 | NX3DV42GU10 | | Always Pb-free | 1 | 1 | |
| NX3DV42GU33 |  | SOT1430-1 | Reel 7" Q1/T1 in Sulfur Barrier Bag | Samples Available | NX3DV42GU33Z (9353 058 99471) | Standard Marking | NX3DV42GU33 | | Always Pb-free | 1 | 1 | |
| Reel 7" Q1/T1 | Withdrawn | NX3DV42GU33X (9353 058 99115) | Standard Marking | NX3DV42GU33 |
- NXP® analog switches NX3 and NX5 families NX3L4051_Q100
- NX3DV42GU IBIS model NX3DV42GU33
- NX3DV42GU NX3DV42
- plastic, extremely thin quad flat package; no leads; 10 terminals NX5L2750CGU
- Standard product orientation 12NC ending 115 NX5L2750CGU
- NX3DV42GU10 NX3DV42
- plastic extremely thin small outline package; no leads; 10 terminals; body 1.3 x 1.6 x 0.5 mm NX3DV42
- plastic extremely thin small outline package; no leads; 10 terminals; body 1.6 x 1.3 x 0.33 mm NX3DV42
- X2QFN10; Reel sulfur barrier pack, SMD, 7" Q1/T1 standard product orientation Orderable part number ending ,471... NX3DV42
- NTS0103GU10
- NX3DV42
