NX5P3201CUK: 3 A USB power switch and 6 A high-side load switch

The NX5P3201 is an advanced dual power switch consisting of two independent switches. They are, an advanced 3 A bidirectional power switch (SWP) for USB OTG and charger port applications, and a high-side 6 A load switch (SW5).

SWP includes an open-drain status indicator. It also consists of OverTemperature Protection (OTP), UnderVoltage LockOut (UVLO) and OverVoltage LockOut (OVLO) protection circuits. The OVLO circuit isolates the pin VBUS when more than 6.55 V is applied to pin VBUS via the USB connector. To prevent unnecessary switching due to ringing on pins VBUS or PMU, the UVLO circuits include a 15 ms turn-on delay. This deglitch function allows the applied voltage to stabilize above VUVLO before closing SWP.

SW5 consists of OTP, Reverse Current Protection (RCP), and UVLO protection circuits. The UVLO isolates VBAT from VIN until VI exceeds VUVLO. If the voltage at VBAT exceeds VI by 30 mV, the RCP circuit isolates VBAT from VIN. It prevents damage to devices on the input side of the switch.

Both switches include slew rate controlled inrush current reduction to prevent damage when switching high capacitive loads.

Data Sheets (1)
Name/DescriptionModified Date
3 A USB power switch and 6 A high-side load switch (REV 1.0) PDF (1.6 MB) NX5P320114 Dec 2015
White Papers (1)
Name/DescriptionModified Date
NXP® Load Switch Basics (REV 1.0) PDF (348.0 kB) NXP_LOAD_SWITCH_BASICS17 Nov 2015
Ordering Information
ProductStatusVCC (V)Logic switching levelsRON (mOhm)ISW (A)tON (ms)RdchPower dissipation considerationsTamb (Cel)Rth(j-a) (K/W)Ψth(j-top) (K/W)Rth(j-c) (K/W)Package name
NX5P3201CUKActive
Package Information
Product IDPackage DescriptionOutline VersionReflow/Wave SolderingPackingProduct StatusPart NumberOrdering code(12NC)MarkingChemical ContentRoHS / Pb Free / RHFLeadFree Conversion DateMSLMSL LF
NX5P3201CUKActiveNX5P3201CUKAZ (9353 046 22041)Standard MarkingNX5P3201CUKAlways Pb-free11