GTL2002DC: 2-bit bidirectional low voltage translator
The Gunning Transceiver Logic - Transceiver Voltage Clamps (GTL-TVC) provide high-speed voltage translation with low ON-state resistance and minimal propagation delay. The GTL2002 provides 2 NMOS pass transistors (Sn and Dn) with a common gate (GREF) and a reference transistor (SREF and DREF). The device allows bidirectional voltage translations between 1.0 V and 5.0 V without use of a direction pin.
When the Sn or Dn port is LOW the clamp is in the ON-state and a low resistance connection exists between the Sn and Dn ports. Assuming the higher voltage is on the Dn port, when the Dn port is HIGH, the voltage on the Sn port is limited to the voltage set by the reference transistor (SREF). When the Sn port is HIGH, the Dn port is pulled to VCC by the pull-up resistors. This functionality allows a seamless translation between higher and lower voltages selected by the user, without the need for directional control.
All transistors have the same electrical characteristics and there is minimal deviation from one output to another in voltage or propagation delay. This is a benefit over discrete transistor voltage translation solutions, since the fabrication of the transistors is symmetrical. Because all transistors in the device are identical, SREF and DREF can be located on any of the other two matched Sn/Dn transistors, allowing for easier board layout. The translator's transistors provide excellent ESD protection to lower voltage devices and at the same time protect less ESD-resistant devices.
GTL2002DC: Product Block Diagram
Outline 3d SOT765-1
Data Sheets (1)
| Name/Description | Modified Date |
|---|---|
| 2-bit bidirectional low voltage translator (REV 8.0) PDF (446.0 kB) GTL2002 | 19 Aug 2013 |
Application Notes (4)
| Name/Description | Modified Date |
|---|---|
| Bidirectional voltage level translators NVT2001/02/03/04/06/08/10, PCA9306, GTL2000/02/03/10 (REV 1.0) PDF (982.0 kB) AN11127 | 17 Apr 2012 |
| Level shifting techniques in I2C-bus design (REV 1.0) PDF (52.0 kB) AN10441 | 20 Jun 2007 |
| AN10145 Bi-directional low voltage translators (REV 2.0) PDF (326.0 kB) AN10145 | 11 Aug 2004 |
| I2C manual (REV 1.0) PDF (4.2 MB) AN10216 | 27 Mar 2003 |
Users Guides (3)
| Name/Description | Modified Date |
|---|---|
| I2C-bus specification and user manual (REV 6.0) PDF (1.4 MB) UM10204 | 28 Apr 2014 |
| I2C-bus specification and user manual (REV 5.0) PDF (1.6 MB) UM10204_JA | 03 Apr 2013 |
| I2C Demonstration Board 2005-1 Quick Start Guide (REV 1.0) PDF (261.0 kB) UM10206 | 13 Jun 2006 |
Brochures (3)
| Name/Description | Modified Date |
|---|---|
| 電圧レベルシフタ (REV 1.1) PDF (3.1 MB) 75017511_JP | 16 Feb 2015 |
| NXP® I2C-bus solutions 2014: Smart, simple solutions for the 12 most common design concerns (REV 1.0) PDF (3.5 MB) 75017540 | 01 Aug 2014 |
| Voltage translation: How to manage mixed-voltage designs with NXP® level translators (REV 1.0) PDF (2.6 MB) 75017511 | 20 May 2014 |
Package Information (1)
| Name/Description | Modified Date |
|---|---|
| plastic very thin shrink small outline package; 8 leads; body width 2.3 mm (REV 1.1) PDF (245.0 kB) SOT765-1 | 05 Jul 2016 |
Packing (1)
| Name/Description | Modified Date |
|---|---|
| VSSOP8; Reel pack, reverse; SMD, 7" Q3/T4 Standard product orientation Orderable part number ending ,125 or... (REV 5.0) PDF (210.0 kB) SOT765-1_125 | 03 May 2013 |
Reports or Presentations (1)
| Name/Description | Modified Date |
|---|---|
| design_con_2003_tecforum_i2c_b_1 (REV 0.1) PDF (4.2 MB) DESIGN_CON_2003_TECFORUM_I2C_B_1 | 27 Jan 2003 |
Ordering Information
| Product | Status | Package version | Application | Enable | Function | Operating Temperature (Cel) | Number of bits | Voltage Translation Range (V) | Operating voltage (VDC) | Operating voltage 2 (V) | Inputs | Outputs | TTL Drive (mA) | GTL Drive (mA) | I2C-bus (kHz) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| GTL2002DC | Active | SOT765-1 | Voltage Translation | Open Drain Voltage Translation | -40~85 | 2 | 1.0 to 5.0 ~ 1.0 to 5.0 |
Package Information
| Product ID | Package Description | Outline Version | Reflow/Wave Soldering | Packing | Product Status | Part NumberOrdering code(12NC) | Marking | Chemical Content | RoHS / Pb Free / RHF | LeadFree Conversion Date | EFR | IFR(FIT) | MTBF(hour) | MSL | MSL LF |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| GTL2002DC | | SOT765-1 | Reel 7" Q3/T4, Reverse | Active | GTL2002DC,125 (9352 774 98125) | 2002 | GTL2002DC |    | Always Pb-free | 0.0 | 3.0 | 3.33E8 | 1 | 1 |
- Bidirectional voltage level translators NVT2001/02/03/04/06/08/10, PCA9306, GTL2000/02/03/10 pca9306
- Level shifting techniques in I2C-bus design pca9685pw
- AN10145 Bi-directional low voltage translators pca9922pw
- I2C manual se98apw
- I2C-bus specification and user manual pca9685pw
- I2C-bus specification and user manual pca9685pw
- I2C Demonstration Board 2005-1 Quick Start Guide pca9685pw
- 電圧レベルシフタ 74AVC16245DGG-Q100
- NXP® I2C-bus solutions 2014: Smart, simple solutions for the 12 most common design concerns pca9685pw
- Voltage translation: How to manage mixed-voltage designs with NXP® level translators 74AVC16245DGG-Q100
- design_con_2003_tecforum_i2c_b_1 lm75a
- plastic very thin shrink small outline package; 8 leads; body width 2.3 mm 74LVC3G17_Q100
- VSSOP8; Reel pack, reverse; SMD, 7" Q3/T4 Standard product orientation Orderable part number ending ,125 or... 74LVC3G17_Q100
- GTL2002
- XC7WT14
