• 简体中文
• English

NVT2003/04/06: Bidirectional voltage-level translator for open-drain and push-pull applications

The NVT2003/04/06 is a family of bidirectional voltage level translators operational from 1.0 V to 3.6 V (Vref(A)) and 1.8 V to 5.5 V (Vref(B)), which allow bidirectional voltage translations between 1.0 V and 5 V without the need for a direction pin in open-drain or push-pull applications. Bit widths ranging from 3-bit to 6-bit are offered for level translation application with transmission speeds < 33 MHz for an open-drain system with a 50 pF capacitance and a pull-up of 197 Ω.

When the An or Bn port is LOW, the clamp is in the ON-state and a low resistance connection exists between the An and Bn ports. The low ON-state resistance (Ron) of the switch allows connections to be made with minimal propagation delay. Assuming the higher voltage is on the Bn port when the Bn port is HIGH, the voltage on the An port is limited to the voltage set by VREFA. When the An port is HIGH, the Bn port is pulled to the drain pull-up supply voltage (Vpu(D)) by the pull-up resistors. This functionality allows a seamless translation between higher and lower voltages selected by the user without the need for directional control.

When EN is HIGH, the translator switch is on, and the An I/O are connected to the Bn I/O, respectively, allowing bidirectional data flow between ports. When EN is LOW, the translator switch is off, and a high-impedance state exists between ports. The EN input circuit is designed to be supplied by Vref(B). To ensure the high-impedance state during power-up or power-down, EN must be LOW.

All channels have the same electrical characteristics and there is minimal deviation from one output to another in voltage or propagation delay. This is a benefit over discrete transistor voltage translation solutions, since the fabrication of the switch is symmetrical. The translator provides excellent ESD protection to lower voltage devices, and at the same time protects less ESD-resistant devices.

Outline 3d SOT403-1

Data Sheets (1)

Application Notes (1)

Users Guides (4)

Brochures (3)

Package Information (4)

Packing (4)

Supporting Information (3)

Ordering Information

Package Information

Product ID	Package Description	Outline Version	Reflow/Wave Soldering	Packing	Product Status	Part NumberOrdering code(12NC)	Marking	Chemical Content	RoHS / Pb Free / RHF	LeadFree Conversion Date	EFR	IFR(FIT)	MTBF(hour)	MSL	MSL LF
NVT2006BQ		SOT763-1		Reel 7" Q1/T1	Active	NVT2006BQ,115 (9352 920 72115)	N2006	NVT2006BQ		Always Pb-free	0.0	2.0	5E8	1	1
NVT2003DP		SOT552-1	Reflow_Soldering_Profile SSOP-TSSOP-VSO-WAVE Reflow_Soldering_Profile SSOP-TSSOP-VSO-WAVE	Reel 13" Q1/T1	Active	NVT2003DP,118 (9352 920 69118)	N2003	NVT2003DP		Always Pb-free	0.0	2.0	5E8	1	1
NVT2006BS		SOT758-1		Reel 13" Q1/T1	Active	NVT2006BS,118 (9352 920 73118)	N06	NVT2006BS		Always Pb-free	0.0	2.0	5E8	1	1
				Reel 13" Q2/T3	Active	NVT2006BSHP (9352 920 73128)	N06	NVT2006BS			0.0	2.0	5E8
NVT2006PW		SOT403-1	SSOP-TSSOP-VSO-WAVE	Reel 13" Q1/T1	Active	NVT2006PW,118 (9352 920 74118)	NVT2006	NVT2006PW		Always Pb-free	0.0	2.0	5E8	1	1