PCA9516A: 5-channel I2C-bus hub

The PCA9516A is a CMOS integrated circuit intended for application in I²C-bus and SMBus systems.

While retaining all the operating modes and features of the I²C-bus system, it permits extension of the I²C-bus by buffering both the data (SDAn) and the clock (SCLn) lines, thus enabling five buses of 400 pF.

The I²C-bus capacitance limit of 400 pF restricts the number of devices and bus length. Using the PCA9516A enables the system designer to divide the bus into five segments off of a hub where any segment-to-segment transition sees only one repeater delay.

It can also be used to run different buses at 5 V and 3.3 V or 400 kHz and 100 kHz buses where the 100 kHz bus is isolated when 400 kHz operation of the other bus is required.

Two or morePCA9516As cannot be put in series.The PCA9516A design does not allow this configuration. Since there is no direction pin, slightly different 'legal' low voltage levels are used to avoid lock-up conditions between the input and the output of each repeater in the hub. A 'regular LOW' applied at the input of a PCA9516A will be propagated as a 'buffered LOW' with a slightly higher value on all the enabled outputs. When this 'buffered LOW' is applied to another PCA9515A, PCA9516A, or PCA9518A in series, the second PCA9515A, PCA9516A, or PCA9518A will not recognize it as a 'regular LOW' and will not propagate it as a 'buffered LOW' again. The PCA9510A/9511A/9513A/9514A and PCA9512A cannot be used in series with the PCA9515A, PCA9516A, or PCA9518A, but can be used in series with themselves since they use shifting instead of static offsets to avoid lock-up conditions.

PCA9516A: Product Block Diagram
Outline 3d SOT403-1

1. The maximum system operating frequency may be less than 400 kHz because of the delays added by the repeater.

Data Sheets (1)
Name/DescriptionModified Date
5-channel I2C-bus hub (REV 3.0) PDF (108.0 kB) PCA9516A23 Apr 2009
Application Notes (4)
Name/DescriptionModified Date
Single card I2C bus buffers (REV 1.0) PDF (238.0 kB) AN1041916 Nov 2010
Level shifting techniques in I2C-bus design (REV 1.0) PDF (52.0 kB) AN1044120 Jun 2007
PCA954X FAMILY OF I²C / SMBus MULTIPLEXERS and SWITCHES (REV 2.0) PDF (807.0 kB) AN26201 Oct 2004
I2C / SMBus Repeaters, Hubs and Expanders (REV 2.0) PDF (1.0 MB) AN25519 Dec 2002
Users Guides (4)
Name/DescriptionModified Date
I2C-bus specification and user manual (REV 6.0) PDF (1.4 MB) UM1020428 Apr 2014
I2C-bus specification and user manual (REV 5.0) PDF (1.6 MB) UM10204_JA03 Apr 2013
PCA9600 demonstration board OM6293 (REV 1.0) PDF (130.0 kB) UM1032315 Dec 2008
I2C Demonstration Board 2005-1 Quick Start Guide (REV 1.0) PDF (261.0 kB) UM1020613 Jun 2006
Brochures (3)
Name/DescriptionModified Date
NXP® I2C-bus solutions 2014: Smart, simple solutions for the 12 most common design concerns (REV 1.0) PDF (3.5 MB) 7501754001 Aug 2014
I2C/SMBus buffers for backplane multi-point and hot-swap applications; NXP® Level-shifting and... (REV 1.0) PDF (773.0 kB) 7501653001 Jul 2008
Extend the I2C-bus with advanced repeaters and hubs; NXP® 2-channel I2C-bus repeaters PCA9515x and... (REV 1.0) PDF (740.0 kB) 7501653201 Jul 2008
Package Information (2)
Name/DescriptionModified Date
plastic small outline package; 16 leads; body width 3.9 mm (REV 1.0) PDF (192.0 kB) SOT109-108 Feb 2016
plastic thin shrink small outline package; 16 leads; body width 4.4 mm (REV 1.0) PDF (300.0 kB) SOT403-108 Feb 2016
Packing (2)
Name/DescriptionModified Date
SO16; Reel pack; SMD, 13" Q1/T1 Standard product orientation Orderable part number ending ,118 or J Ordering... (REV 4.0) PDF (210.0 kB) SOT109-1_11824 Apr 2013
TSSOP16; Reel pack; SMD, 13" Q1/T1 Standard product orientation Orderable part number ending ,118 or... (REV 1.0) PDF (218.0 kB) SOT403-1_11808 Apr 2013
Supporting Information (3)
Name/DescriptionModified Date
Footprint for reflow soldering (REV 1.0) PDF (9.0 kB) SO-SOJ-REFLOW08 Oct 2009
Footprint for wave soldering (REV 1.0) PDF (8.0 kB) SO-SOJ-WAVE08 Oct 2009
Footprint for wave soldering (REV 1.0) PDF (16.0 kB) SSOP-TSSOP-VSO-WAVE08 Oct 2009
IBIS Model
Ordering Information
ProductStatus
PCA9516APWActive
PCA9516ADActive
Package Information
Product IDPackage DescriptionOutline VersionReflow/Wave SolderingPackingProduct StatusPart NumberOrdering code(12NC)MarkingChemical ContentRoHS / Pb Free / RHFLeadFree Conversion DateEFRIFR(FIT)MTBF(hour)MSLMSL LF
PCA9516ADSOT109-1SO-SOJ-REFLOW SO-SOJ-WAVE
SO-SOJ-REFLOW SO-SOJ-WAVE
Reel 13" Q1/T1ActivePCA9516AD,118 (9352 758 82118)PCA9516ADPCA9516ADweek 13, 20050.02.05E811
Bulk PackActivePCA9516AD,112 (9352 758 82112)PCA9516ADPCA9516ADweek 13, 20050.02.05E811
PCA9516APWSOT403-1SSOP-TSSOP-VSO-WAVEReel 13" Q1/T1ActivePCA9516APW,118 (9352 758 83118)PA9516APCA9516APWweek 13, 20050.02.05E811
Bulk PackActivePCA9516APW,112 (9352 758 83112)PA9516APCA9516APWweek 13, 20050.02.05E811
5-channel I2C-bus hub pca9516apw
Single card I2C bus buffers pca9518apw
Level shifting techniques in I2C-bus design pca9685pw
PCA954X FAMILY OF I²C / SMBus MULTIPLEXERS and SWITCHES pca9516apw
I2C / SMBus Repeaters, Hubs and Expanders pca9600
I2C-bus specification and user manual pca9685pw
I2C-bus specification and user manual pca9685pw
PCA9600 demonstration board OM6293 pca9600
I2C Demonstration Board 2005-1 Quick Start Guide pca9685pw
NXP® I2C-bus solutions 2014: Smart, simple solutions for the 12 most common design concerns pca9685pw
I2C/SMBus buffers for backplane multi-point and hot-swap applications; NXP® Level-shifting and... pca9518apw
Extend the I2C-bus with advanced repeaters and hubs; NXP® 2-channel I2C-bus repeaters PCA9515x and... pca9600
PCA9516 IBIS model PCA9516APW
PCA9516 IBIS model PCA9516AD
plastic small outline package; 16 leads; body width 3.9 mm NPIC6C596A_Q100
Footprint for reflow soldering NPIC6C596A_Q100
Footprint for wave soldering NPIC6C596A_Q100
SO16; Reel pack; SMD, 13" Q1/T1 Standard product orientation Orderable part number ending ,118 or J Ordering... NPIC6C596A_Q100
SOT403-1 LPC812M101JDH16
SSOP-TSSOP-VSO-WAVE LPC1114FDH28
Reel 13" Q1/T1 LPC812M101JDH16
PCA9516APW
SA614A
PCA9633