PCA9701D: 18 V tolerant SPI 16-bit/8-bit GPI with INT

The PCA9701/PCA9702 are low power 18 V tolerant SPI General Purpose Input (GPI) shift register designed to monitor the status of switch inputs. It generates an interrupt when one or more of the switch inputs change state. The input level is recognized as a HIGH when it is greater than 0.7 x VDD and as a LOW when it is less than 0.4 x VDD (minimum threshold of 2 V at 5 V node). The PCA9701 can monitor up to 16 switch inputs and the PCA9702 can monitor up to 8 switch inputs.

The falling edge of the CS pin samples the input port status and clears the interrupt. When CS is LOW, the rising edge of the SCLK loads the shift register and shifts the value out of the shift register. The serial input is sampled on the falling edge of SCLK.

Each of the input ports has a 18 V breakdown ESD protection circuit. When used with a series resistor (minimum 100 kΩ), the input can connect to a 12 V battery and support double battery, reverse battery, 27 V jump start and 40 V load dump conditions in automotive applications. Higher voltages can be tolerated on the inputs depending on the series resistor used to limit the input current.

With both the high breakdown voltage and high ESD, these devices are useful for both automotive and mobile applications.

The PCA9703/PCA9704 are new pin compatible devices for the PCA9701/PCA9702 which have an interrupt masking feature allowing selected inputs to not generate interrupts and provides higher ground offset of 0.55 x VDD (minimum of 2.5 V at 5 V node) with minimum hysteresis of 0.05 x VDD (minimum of 225 mV at 5 V node).

PCA9701D: Product Block Diagram
Outline 3d SOT137-1
Data Sheets (1)
Name/DescriptionModified Date
18 V tolerant SPI 16-bit/8-bit GPI with INT (REV 7.0) PDF (370.0 kB) PCA9701_PCA970226 Sep 2014
Application Notes (2)
Name/DescriptionModified Date
PCA9500/PCA9501 provides simple card maintenance and control using I²C-bus (REV 1.0) PDF (90.0 kB) AN25623 Mar 2009
Level shifting techniques in I2C-bus design (REV 1.0) PDF (52.0 kB) AN1044120 Jun 2007
Users Guides (4)
Name/DescriptionModified Date
I2C-bus specification and user manual (REV 6.0) PDF (1.4 MB) UM1020428 Apr 2014
I2C-bus specification and user manual (REV 5.0) PDF (1.6 MB) UM10204_JA03 Apr 2013
PCA9698 demonstration board OM6281 (REV 1.0) PDF (558.0 kB) UM1026726 Sep 2008
I2C Demonstration Board 2005-1 Quick Start Guide (REV 1.0) PDF (261.0 kB) UM1020613 Jun 2006
Brochures (1)
Name/DescriptionModified Date
NXP® I2C-bus solutions 2014: Smart, simple solutions for the 12 most common design concerns (REV 1.0) PDF (3.5 MB) 7501754001 Aug 2014
Package Information (1)
Name/DescriptionModified Date
plastic small outline package; 24 leads; body width 7.5 mm (REV 1.0) PDF (379.0 kB) SOT137-108 Feb 2016
Packing (1)
Name/DescriptionModified Date
SO24; Reel pack; SMD, 13" Q1/T1 Standard product orientation Orderable part number ending ,118 or J Ordering... (REV 4.0) PDF (235.0 kB) SOT137-1_11812 Apr 2013
Supporting Information (1)
Name/DescriptionModified Date
Footprint for wave soldering (REV 1.0) PDF (8.0 kB) SO-SOJ-WAVE08 Oct 2009
IBIS Model
Ordering Information
ProductStatusReset input pinPackage namePackage versionOperating Temperature (Cel)
PCA9701DActivenoSO24SOT137-1-40~125
Package Information
Product IDPackage DescriptionOutline VersionReflow/Wave SolderingPackingProduct StatusPart NumberOrdering code(12NC)MarkingChemical ContentRoHS / Pb Free / RHFLeadFree Conversion DateEFRIFR(FIT)MTBF(hour)MSLMSL LF
PCA9701DSOT137-1SO-SOJ-WAVEReel 13" Q1/T1ActivePCA9701D,118 (9352 836 17118)PCA9701DPCA9701DAlways Pb-free0.02.05E811
Bulk PackActivePCA9701D,112 (9352 836 17112)PCA9701DPCA9701DAlways Pb-free0.02.05E811
18 V tolerant SPI 16-bit/8-bit GPI with INT pca9701_pca9702
PCA9500/PCA9501 provides simple card maintenance and control using I²C-bus PCA9553
Level shifting techniques in I2C-bus design pca9685pw
I2C-bus specification and user manual pca9685pw
I2C-bus specification and user manual pca9685pw
PCA9698 demonstration board OM6281 PCA9553
I2C Demonstration Board 2005-1 Quick Start Guide pca9685pw
NXP® I2C-bus solutions 2014: Smart, simple solutions for the 12 most common design concerns pca9685pw
PCA9701 IBIS model PCA9701PW
plastic small outline package; 24 leads; body width 7.5 mm 74LVC4245A_Q100
Footprint for wave soldering NPIC6C596A_Q100
SO24; Reel pack; SMD, 13" Q1/T1 Standard product orientation Orderable part number ending ,118 or J Ordering... 74LVC4245A_Q100
PCA9702PW
PCA9552