PTN36241BBS: SuperSpeed USB 3.0 redriver

PTN36241B is a SuperSpeed USB 3.0 redriver IC that enhances signal quality by performing receive equalization on the deteriorated input signal followed by transmit de-emphasis maximizing system link performance. With its superior differential signal conditioning and enhancement capability, the device delivers significant flexibility and performance scaling for various systems with different PCB trace and cable channel conditions and still benefit from optimum power consumption.

PTN36241B is a dual-channel device that supports data signaling rate of 5 Gbit/s through each channel. PTN36241B has two channels: one channel is facing the USB host, and another channel is facing the USB peripheral or device. Each channel consists of a high-speed Transmit (Tx) differential lane and a high-speed Receive (Rx) differential lane.

PTN36241B has independent 5-level configuration pins for each channel to select receive equalization, transmit de-emphasis and output swing and these pins can be easily configured by board-strapping (for example, short, open, resistor). To support applications that require greater level of configurability, PTN36241B delivers intelligent multiplexing of I²C-bus interface onto 5-level configuration pins. By default, the device is configured with the board-strapped levels of configuration pins. When I²C-bus reads/writes are performed over these multiplexed pins, the device decodes I²C transactions and configures its internal functions appropriately.

PTN36241B has built-in advanced power management capability that enables significant power savings under various different USB 3.0 Low-power modes (U2/U3). It can detect LFPS signaling and link electrical conditions and can dynamically activate/de-activate internal circuitry and logic. The device performs these actions without host software intervention and conserves power.

PTN36241B will go through the compliance testing controlled by the internal state machine. No compliance pin is required.

PTN36241B is powered from 3.3 V supply and is available in HVQFN24 4 mm x 4 mm package with 0.5 mm pitch.

sot616-3_3d
Data Sheets (1)
Name/DescriptionModified Date
SuperSpeed USB 3.0 redriver (REV 4.0) PDF (586.0 kB) PTN36241B22 May 2014
Package Information (1)
Name/DescriptionModified Date
plastic thermal enhanced very thin quad flat package; no leads; 24 terminals; body 4 x 4 x 0.85 mm (REV 1.1) PDF (217.0 kB) SOT616-304 Mar 2016
Packing (2)
Name/DescriptionModified Date
HVQFN24; Reel pack; SMD, 13" Q2/T3 Turned product orientation Orderable part number ending ,128 or HP... (REV 2.0) PDF (257.0 kB) SOT616-3_12826 Mar 2014
HVQFN24; Reel pack; SMD, 13" Q1/T1 Standard product orientation Orderable part number ending ,118 or... (REV 1.0) PDF (265.0 kB) SOT616-3_11816 Apr 2013
Ordering Information
ProductStatusDescriptionPackage versionPackage name
PTN36241BBSActiveSOT616-3HVQFN24
Package Information
Product IDPackage DescriptionOutline VersionReflow/Wave SolderingPackingProduct StatusPart NumberOrdering code(12NC)MarkingChemical ContentRoHS / Pb Free / RHFLeadFree Conversion DateMSLMSL LF
PTN36241BBSSOT616-3Reel 7" Q1/T1ActivePTN36241BBS,115 (9352 960 76115)241BPTN36241BBSAlways Pb-free11
Reel 13" Q2/T3ActivePTN36241BBS,128 (9352 960 76128)241BPTN36241BBSAlways Pb-free11
Reel 13" Q1/T1ActivePTN36241BBS,118 (9352 960 76118)241BPTN36241BBSAlways Pb-free11
SuperSpeed USB 3.0 redriver PTN36241BBS
SOT616-3 LPC1114LVFHN24
HVQFN24; Reel pack; SMD, 13" Q2/T3 Turned product orientation Orderable part number ending ,128 or HP... PTN36241BBS
Reel 13" Q1/T1 LPC1112FHN24
BGX7101HN