SC16IS741IPW: Single UART with I2C-bus/SPI interface, 64 bytes of transmit and receive FIFOs, IrDA SIR built-in support
The SC16IS741 is a slave I²C-bus/SPI interface to a single-channel high performance UART. It offers data rates up to 5 Mbit/s and guarantees low operating and sleeping current. The device comes in the TSSOP16 package, which makes it ideally suitable for handheld, battery operated applications. This device enables seamless protocol conversion from I²C-bus or SPI to and RS-232/RS-485 and are fully bidirectional.
The SC16IS741’s internal register set is backward-compatible with the widely used and widely popular 16C450. This allows the software to be easily written or ported from another platform.
The SC16IS741 also provides additional advanced features such as auto hardware and software flow control, automatic RS-485 support, and software reset. This allows the software to reset the UART at any moment, independent of the hardware reset signal.
Outline 3d SOT403-1
2.1 General features
- Single full-duplex UART
- Selectable I²C-bus or SPI interface
- 3.3 V or 2.5 V operation
- Industrial temperature range: -40 ℃ to +95 ℃
- 64 bytes FIFO (transmitter and receiver)
- Fully compatible with industrial standard 16C450 and equivalent
- Baud rates up to 5 Mbit/s in 16× clock mode
- Auto hardware flow control using RTS/CTS
- Auto software flow control with programmable Xon/Xoff characters
- Single or double Xon/Xoff characters
- Automatic RS-485 support (automatic slave address detection)
- RS-485 driver direction control via RTS signal
- RS-485 driver direction control inversion
- Built-in IrDA encoder and decoder interface
- Software reset
- Transmitter and receiver can be enabled/disabled independent of each other
- Receive and Transmit FIFO levels
- Programmable special character detection
- Fully programmable character formatting
5-bit, 6-bit, 7-bit or 8-bit character
Even, odd, or no parity
1, 1½, or 2 stop bits
- Line break generation and detection
- Internal Loopback mode
- Sleep current less than 30 μA at 3.3 V
- Industrial and commercial temperature ranges
- Available in the TSSOP16 package
2.2 I²C-bus features
- Noise filter on SCL/SDA inputs
- 400 kbit/s maximum speed
- Compliant with I²C-bus fast speed
- Slave mode only
2.3 SPI features
- Slave mode only
- SPI Mode 0
Data Sheets (1)
White Papers (1)
Package Information (1)
Packing (2)
Supporting Information (1)
Ordering Information
| Product | Status | Status | Budgetary Price excluding tax(US$) | Package Type and Termination Count | GPIOs | Qualification Tier |
|---|
| SC16IS741IPW | Active | | | | | |
| SC16IS741IPW/Q900 | No Longer Manufactured | | | | | |
Package Information
| Product ID | Package Description | Outline Version | Reflow/Wave Soldering | Packing | Product Status | Part NumberOrdering code(12NC) | Marking | Chemical Content | RoHS / Pb Free / RHF | LeadFree Conversion Date | EFR | IFR(FIT) | MTBF(hour) | MSL | MSL LF |
|---|
| SC16IS741IPW | | SOT403-1 | SSOP-TSSOP-VSO-WAVE | Bulk Pack | Active | SC16IS741IPW,112
(9352 907 36112) | Standard Marking | SC16IS741IPW |    | Always Pb-free | 0.0 | 2.0 | 5E8 | 1 | 1 |
| Reel 13" Q2/T3 | Active | SC16IS741IPW,128
(9352 907 36128) | Standard Marking | SC16IS741IPW | | Always Pb-free | 0.0 | 2.0 | 5E8 | 1 | 1 |
| Reel 13" Q1/T1 | Active | SC16IS741IPW,118
(9352 907 36118) | Standard Marking | SC16IS741IPW | | Always Pb-free | 0.0 | 2.0 | 5E8 | 1 | 1 |
