SPBT2632C1A:Bluetooth V3.0 module class 1, supporting SPP and iAP with AT2 command set

The SPBT2632C1A.AT2 is an easy to use Bluetooth module, compliant with Bluetooth v3.0.

The module provides complete RF platform in a small form factor.

The SPBT2632C1A.AT2 enables electronic devices with wireless connectivity, not requiring any RF experience or expertise for integration into the final product. The SPBT2632C1A.AT2 module, being a certified solution, optimizes the time to market of the final application.

The module is designed for maximum performance in a minimal space including fast speed UART and 16 general purpose I/O lines, several serial interface options, and up to 560 kbps transmission speed with SPP service active, 250 kbps with iAP1 service active.

An optimized design allows the integration of a complete working Bluetooth modem, including antenna and LPO (low power oscillator), enabling low power mode capability in the minimum possible size.

The SPBT2632C1A.AT2 is a surface mount PCB module that provides fully embedded, ready-to-use Bluetooth wireless technology. The reprogrammable Flash memory contains embedded firmware for serial cable replacement using the Bluetooth SPP profile.

Embedded Bluetooth AT2 command firmware is a friendly interface, which realizes a simple control for cable replacement, enabling communication with most Bluetooth enabled devices, provided that the devices support SPP profile. The SPBT2532C1A.AT2, supporting iAP1 profile, provides communication with Android, smartphone and Apple® iOS Bluetooth enabled devices. An Apple authentication IC is required to exchange data with an Apple device or access an Apple device application. The AT2 FW includes the Bluetooth SPP profile capable of recognizing the Apple authentication chip.

Key Features

  • Bluetooth radio
    • Fully embedded Bluetooth® v3.0 with profiles
    • Class 1 module
    • Complete RF ready module
    • 128-bit encryption security
    • Range up to 60 m LOS
    • Integrated antenna
    • Multipoint capability
  • ST Micro Cortex-M3 microprocessor up to 72 MHz (256 kb Flash, 48 kb RAM)
  • Modem transmitter speed
    • With SPP service active: 560 kbps transmission speed
  • General I/O
    • 16 general purpose I/Os
  • User interface
    • AT2 command set (abSerial)
    • Firmware upgrade over UART
  • FCC and Bluetooth qualified
  • Single voltage supply: 2.5 V typical
  • Small form factor: 15 x 27 x 2.9 mm
  • Operating temperature range: -40 °C to 85 °C
Product Specifications
DescriptionVersionSize
DS8950: Bluetooth® technology class-1 module7.0606 KB
Application Notes
DescriptionVersionSize
AN4128: Demonstration board for Bluetooth® module class 1 SBT2632C1A.AT21.01 MB
User Manuals
DescriptionVersionSize
UM1547: Using the firmware of the AT command set6.0494 KB
Design Notes & Tips
DescriptionVersionSize
DT0069: Enabling the Bluetooth Low Energy Direct Test Mode (DTM) with BlueNRG-MS1.0248 KB
DT0070: How to set the Bluetooth device address on BlueNRG-MS1.0195 KB
Presentations
DescriptionVersionSize
Classic Bluetooth® 3.0 modules - A Comprehensive User Guide1.01 MB
Solution Evaluation Tools
Part NumberManufacturerDescription
STEVAL-SPBT4ATV3USB dongle for the Bluetooth® class 1 SPBT2632C1A.AT2 module
Sample & Buy
Part NumberPackagePacking TypeOperating Temperature (°C) (min)Operating Temperature (°C) (max)Unit Price (US$) *QuantityECCN (EU)ECCN (US)Country of Origin
SPBT2632C1A.AT2RF MODULETray-4085--NEC5A992A-
Quality & Reliability
Part NumberPackageGradeRoHS Compliance GradeMaterial Declaration**
SPBT2632C1A.AT2RF MODULEIndustrialEcopack2md_bc-wspc-ssyst.-wspc-bluetooth-wspc-module_hbbc-wspc-bt2c143-wspc-(spbt2632c1a.at2)-wspc-wcp-wspc-rev-wspc-2_signed.pdf
md_bc-wspc-ssyst.-wspc-bluetooth-wspc-module_hbbc-wspc-bt2c143-wspc-(spbt2632c1a.at2)-wspc-wcp-wspc-rev-wspc-2.xml
Bluetooth® technology class-1 module SPBT2632C1A
Demonstration board for Bluetooth® module class 1 SBT2632C1A.AT2 STEVAL-SPBT4ATV3
Using the firmware of the AT command set STEVAL-SPBT3ATV3
Enabling the Bluetooth Low Energy Direct Test Mode (DTM) with BlueNRG-MS SPBT3-0DP2
How to set the Bluetooth device address on BlueNRG-MS SPBT3-0DP2
Using the firmware of the AT command set STEVAL-SPBT3ATV3
md_bc-wspc-ssyst.-wspc-bluetooth-wspc-module_hbbc-wspc-bt2c143-wspc-(spbt2632c1a.at2)-wspc-wcp-wspc-rev-wspc-2_signed.pdf SPBT2632C1A
md_bc-wspc-ssyst.-wspc-bluetooth-wspc-module_hbbc-wspc-bt2c143-wspc-(spbt2632c1a.at2)-wspc-wcp-wspc-rev-wspc-2.xml SPBT2632C1A