MC10E112: ECL Quad Driver

The MC10E/100E112 is a quad driver with two pairs of OR/NOR outputs from each gate, and a common, buffered enable input. Using the data inputs the device can serve as an ECL memory address fan-out driver. Using just the enable input, the device serves as a clock driver, although the MC10E/100E111 is designed specifically for this purpose, and offers lower skew than the E112. For memory address driver applications where scan capabilities are required, please refer to the E212 device.The 100 Series contains temperature compensation.

特性
  • 600ps Max. Propagation Delay
  • Common Enable Input
  • PECL Mode Operating Range: VCC = 4.2 V to 5.7 V with VEE = 0 V
  • NECL Mode Operating Range: VCC = 0 V with VEE = -4.2 V to -5.7 V
  • Internal Input Pulldown Resistors
  • ESD Protection: > 2 KV HBM, > 200 V MM
  • Meets or Exceeds JEDEC Spec EIA/JESD78 IC Latchup Test
  • Moisture Sensitivity Level 1For Additional Information, see Application Note AND8003/D
  • Flammability Rating: UL-94 code V-0 @ 1/8", Oxygen Index 28 to 34
  • Transistor Count = 125 devices
  • Pb-Free Packages are Available
封装
应用注释 (17)
Document TitleDocument ID/SizeRevisionRevision Date
AC Characteristics of ECL DevicesAND8090/D (896.0kB)1
Clock Generation and Clock and Data Marking and Ordering Information GuideAND8002/D (71kB)12
Clock Management Design Using Low Skew and Low Jitter DevicesTND301/D (205.0kB)0
Designing with PECL (ECL at +5.0 V)AN1406/D (105.0kB)2
ECL Clock Distribution TechniquesAN1405/D (54.0kB)1
ECLinPS and ECLinPS Lite SPICE I/O Modeling KitAN1503/D (120.0kB)6
ECLinPS™ Circuit Performance at Non-Standard VIH LevelsAN1404/D (51.0kB)1
Interfacing Between LVDS and ECLAN1568/D (121.0kB)11
Interfacing with ECLinPSAND8066/D (72kB)3
Metastability and the ECLinPS FamilyAN1504/D (103.0kB)3
Odd Number Divide By Counters with 50% Outputs and Synchronous ClocksAND8001/D (90.0kB)0
Phase Lock Loop General OperationsAND8040/D (64.0kB)3
Storage and Handling of Drypack Surface Mount DeviceAND8003/D (49kB)2Mar, 2016
Termination of ECL Logic DevicesAND8020/D (176.0kB)6
The ECL Translator GuideAN1672/D (142.0kB)12
Thermal Analysis and Reliability of WIRE BONDED ECLAND8072/D (119.0kB)5
Using Wire-OR Ties in ECLInPS™ DesignsAN1650/D (1130.0kB)3
封装图纸 (1)
Document TitleDocument ID/SizeRevision
28 LEAD PLCC776-02 (67.7kB)F
数据表 (1)
Document TitleDocument ID/SizeRevisionRevision Date
5V ECL Quad DriveMC10E112/D (148kB)9Jul, 2016
产品订购型号
产品状况Compliance封装MSL*容器预算价格 (1千个数量的单价)
MC10E112FNR2GActivePb-free Halide freePLCC-28776-023Tape and Reel500联系BDTIC
订购产品技术参数
ProductTypeChannelsInput / Output RatioInput LevelOutput LevelVCC Typ (V)tJitterRMS Typ (ps)tskew(o-o) Max (ps)tpd Typ (ns)tR & tF Max (ps)fmaxClock Typ (MHz)fmaxData Typ (Mbps)
MC10E112FNR2GSignal Driver41:2ECLECL5<1400.55700700
5V ECL Quad Drive (148kB) MC10E112
AC Characteristics of ECL Devices NB100LVEP91
Clock Generation and Clock and Data Marking and Ordering Information Guide NB100LVEP91
Clock Management Design Using Low Skew and Low Jitter Devices MC10H604
Designing with PECL (ECL at +5.0 V) NB100LVEP91
ECL Clock Distribution Techniques NB100LVEP91
ECLinPS and ECLinPS Lite SPICE I/O Modeling Kit MC100EP91
ECLinPS™ Circuit Performance at Non-Standard VIH Levels MC10E195
Interfacing Between LVDS and ECL NB100ELT23L
Interfacing with ECLinPS NB100LVEP91
Metastability and the ECLinPS Family MC10EPT20
Odd Number Divide By Counters with 50% Outputs and Synchronous Clocks NUP4201
Phase Lock Loop General Operations MC10H604
Storage and Handling of Drypack Surface Mount Device NB3U23C
Termination of ECL Logic Devices NB100LVEP91
The ECL Translator Guide NB100LVEP91
Thermal Analysis and Reliability of WIRE BONDED ECL NB100LVEP91
Using Wire-OR Ties in ECLInPS™ Designs MC10H351
28 LEAD PLCC MC10H604