NCN4557: SIM/SAM/Smart Card Power Supply and Level Shifter, Dual
The NCN4557 is a dual interface analog circuit designed to translate the voltages between SIM Cards, SAM Cards or Smart Cards and a microcontroller (or similar control device). It integrates two LDOs for power conversion and three level shifters per channel allowing the management of two independent chip cards. The device fulfills the ISO-7816 and EMV smart card interface requirements as well as the GSM and 3G mobile standard. Due to a built-in sequencer, the device enables automatic activation and deactivation. Through the ENABLE pin a low current shutdown mode can be activated extending the battery life.The card power supply voltage (1.8 V or 3.0 V) and the card socket A or B are selected using two dedicated pins (SEL0 & SEL1).
特性- Supports 1.8 V or 3.0 V Operating SIM/SAM/Smart Cards
- The LDOs are able to Supply more than 50 mA Under 1.8 V and 3.0 V
- ESD Protection on Card Pins in Excess of 8.0 kV
- Built-in Sequencer for Activation and Deactivation
- Very Compact LowProfile 3x3 QFN16 Package
| 优势- Support Main Types of SIM cards
- High load drive capabilities compatible with 3G standard
- Enhanced system safety
- Power-up and Power-down internally managed
- Save space
|
应用- Dual SIM Card Interface Circuit for 2G, 2.5G and 3G Mobile Phone Application
- Wireless PC/Laptop Cards (PCMCIA Cards)
- Smart Card Readers
| 终端产品- POS Terminals (SAM Card Interfaces)
- Portable Multimedia Players (PMP)
- Set Top Box (STB)
|
封装
数据表 (1)
封装图纸 (1)
产品订购型号
| 产品 | 状况 | Compliance | 封装 | MSL* | 容器 | 预算价格 (1千个数量的单价） |
|---|
| NCN4557MTG | Last Shipments | Pb-free
Halide free | QFN-16 | 488AK | 1 | Tube | 123 | |
| NCN4557MTR2G | Active | Pb-free
Halide free | QFN-16 | 488AK | 1 | Tape and Reel | 3000 | $2.0 |
订购产品技术参数
| Product | VCC Min (V) | VCC Max (V) | IT Typ (mA) | II(standby) Max (µA) | fClock Max (MHz) |
|---|
| NCN4557MTR2G | 1.8 | 5.5 | 0.03 | 3 | 5 |
