NCT175: Industry Standard Digital Temperature Sensor with 2‐wire Interface and SMBus time-out feature of 75ms-325ms
The NCT175 is a two-wire serially programmable temperature sensor with an over-temperature/interrupt output pin to signal out of limit conditions. This is an open-drain pin and can operate in either comparator or interrupt mode. Temperature measurements are converted into digital form using a high resolution (12 bit),
sigma-delta, analog-to-digital converter (ADC). The device operates over the –55°C to +125°C temperature range.
特性- 12-bit Temperature-to-Digital Converter
- Input Voltage Range from 3.0 V to 5.5 V
- Temperature Range from −55°C to +125°C
- SMBus/I2C Interface
- SMBUS time-out of 75ms to 325ms
- Overtemperature Indicator
- Support for SMBus/ALERT
- Shutdown Mode for Low Power Consumption
- One-shot Mode
- Available in 8−pin Micro8 Package
- These Devices are Pb-Free, Halogen Free/BFR Free and are RoHS
Compliant
|
应用- Computer Thermal Monitoring
Thermal Protection
Isolated Sensors
Battery Management
Office Electronics
Electronic Test Equipment
Thermostat Controls
System Thermal Management
|
数据表 (1)
封装图纸 (1)
产品订购型号
| 产品 | 状况 | Compliance | 具体说明 | 封装 | MSL* | 容器 | 预算价格 (1千个数量的单价） |
|---|
| NCT175DMR2G | Active | Pb-free
Halide free | Industry Standard Digital Temperature Sensor with 2‐wire Interface and SMBus time-out feature of 75ms-325ms, Local and Remote Temp sensor | Micro8™ | 846A-02 | 1 | Tape and Reel | 3000 | $0.36 |
订购产品技术参数
| Product | Sensor Type | Data Transmission Standard | ICC Max (mA) | VCC Min (V) | VCC Max (V) | T Min (°C) | T Max (°C) | Temperature Error (°C) |
|---|
| NCT175DMR2G | Local | SMBus | 0.575 | 3 | 5.5 | -55 | 125 | ±1 |
