| ADS8361 | |
| Resolution(Bits) | 16 |
| Sample Rate (max) | 500kSPS |
| Architecture | SAR |
| Power Consumption(Typ)(mW) | 150 |
| SINAD(dB) | 83 |
| SNR(dB) | 83 |
| SFDR(dB) | 94 |
| DNL(Max)(+/-LSB) | 1.5 |
| INL(Max)(+/-LSB) | 4 |
| No Missing Codes(Bits) | 14 |
| No. of Supplies | 2 |
| Analog Voltage AV/DD(Min)(V) | 4.75 |
| Analog Voltage AV/DD(Max)(V) | 5.25 |
| Logic Voltage DV/DD(Min)(V) | 2.7 |
| Logic Voltage DV/DD(Max)(V) | 5.5 |
| Input Configuration Range | +/-2.5V at +2.5V |
| Reference Mode | Int and Ext |
| Rating | Catalog |
| Pin/Package | 24SSOP/QSOP, 32QFN |
| Comments | 250 kSPS per channel |
| # Input Channels | 4 |
| Operating Temp Range(Celsius) | -40 to 125 |
The ADS8361 is a dual, 16-bit, 500kSPS, Analog-to-Digital (A/D) converter with four fully differential input channels grouped into two pairs for high-speed, simultaneous signal acquisition. Inputs to the sample-and-hold amplifiers are fully differential and are maintained differentially to the input of the A/D converter. This provides excellent common-mode rejection of 80dB at 50kHz, which is important in high-noise environments.
The ADS8361 offers a high-speed, dual serial interface and control inputs to minimize software overhead. The output data for each channel is available as a 16-bit word. The ADS8361 is offered in SSOP-24 and QFN-32 (5x5) packages and is fully specified over the -40°C to +125°C operating range.
| 器件 | 状态 | 温度(oC) | 价格（美元） | 封装 | 引脚 |
| ADS8361IDBQ | ACTIVE | -40 to 125 | 9.65 | 1ku | SSOP/QSOP (DBQ) | 24 |
| ADS8361IDBQG4 | ACTIVE | -40 to 125 | 9.65 | 1ku | SSOP/QSOP (DBQ) | 24 |
| ADS8361IDBQR | ACTIVE | -40 to 125 | 8.75 | 1ku | SSOP/QSOP (DBQ) | 24 |
| ADS8361IDBQRG4 | ACTIVE | -40 to 125 | 8.75 | 1ku | SSOP/QSOP (DBQ) | 24 |
| ADS8361IRHBR | ACTIVE | -40 to 125 | 8.75 | 1ku | QFN (RHB) | 32 |
| ADS8361IRHBRG4 | ACTIVE | -40 to 125 | 8.75 | 1ku | QFN (RHB) | 32 |
| ADS8361IRHBT | ACTIVE | -40 to 125 | 9.65 | 1ku | QFN (RHB) | 32 |
| ADS8361IRHBTG4 | ACTIVE | -40 to 125 | 9.65 | 1ku | QFN (RHB) | 32 |
