DRV8841 2.5A 双路刷式直流或单路双极步进电机驱动器（PWM 控制器）
The DRV8841 provides an integrated motor driver solution for printers, scanners, and other automated equipment applications. The device has two H-bridge drivers, and can be used to drive two DC motors, one stepper motor, or other loads. The output driver block for each consists of N-channel power MOSFET’s configured as H-bridges. The DRV8841 can supply up to 2.5-A peak or 1.75-A RMS output current (with proper heatsinking at 24 V and 25°C) per H-bridge.
Separate inputs to independently control each half of the H-bridge are provided.
Internal shutdown functions are provided for over current protection, short circuit protection, under voltage lockout and overtemperature.
TheDRV8841 is available in a 28-pin HTSSOP package with PowerPAD (Eco-friendly: RoHS & no Sb/Br).
| DRV8841 | |
| Vs (Min) (V) | 8.2 |
| Vs (Max) (V) | 45 |
| RMS Output Current (A) | 1.75 |
| # of half-bridges | 2.5 |
| Control I/F | 2 |
| Additional Features | 400 |
| Peak Output Current (A) | 4 |
| rDS(on) (Ohms) | PWM |
DRV8841 特性
- Dual H-Bridge DC Motor Driver
- Drives Two DC Motors, One Stepper Motor or Other Loads
- Two-Bit Winding Current Control Allows Up to 4 Current Levels
- Low MOSFET On-Resistance
- 2.5-A Maximum Drive Current at 24 V, 25°C
- Built-In 3.3-V Reference Output
- Industry-Standard PWM Control Interface
- 8.2-V to 45-V Operating Supply Voltage Range
- Thermally Enhanced Surface Mount Package
- APPLICATIONS
- Printers
- Scanners
- Office Automation Machines
- Gaming Machines
- Factory Automation
- Robotics
DRV8841 芯片订购指南
| 器件 | 状态 | 温度 | 价格 | 封装 | 引脚 | 封装数量 | 封装载体 | 丝印标记 |
| DRV8841PWP | ACTIVE | -40 to 85 | 2.70 | 1ku | HTSSOP (PWP) | 28 | 50 | TUBE | |
| DRV8841PWPR | ACTIVE | -40 to 85 | 2.25 | 1ku | HTSSOP (PWP) | 28 | 2000 | LARGE T&R |
DRV8841 质量与无铅数据
| 器件 | 环保计划* | 铅/焊球涂层 | MSL 等级/回流焊峰 | 环保信息与无铅 (Pb-free) | DPPM / MTBF / FIT 率 |
| DRV8841PWP | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-3-260C-168 HR | DRV8841PWP | DRV8841PWP |
| DRV8841PWPR | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-3-260C-168 HR | DRV8841PWPR | DRV8841PWPR |
DRV8841 应用技术支持与电子电路设计开发资源下载
- DRV8841 数据资料 dataSheet 下载.PDF
- TI 德州仪器电机驱动器产品选型与价格 . xls
- 所选封装材料的热学和电学性质 (PDF 645 KB)
- 高速数据转换 (PDF 1967 KB)
- 使您的仪器放大器设计达到最佳效果 (zhct011.PDF, 897 KB)
- 低成本电流并联监视器 IC 使动圈式仪表设计复兴 (zhct030.PDF, 1.04 MB)
- Demystifying the Operational Transconductance Amplifier (sboa117.HTM, 8 KB)
- TI 工业自动电机控制/驱动器解决方案 2011 (Rev. B) (PDF 1322 KB)
- 在 PSPICE 中使用德州仪器 (TI) SPICE 模型 (zhca088.HTM, 8 KB)
- PowerPAD™ Thermally Enhanced Package (slma002g.HTM, 8 KB)
- 运算放大器的单电源操作 (PDF 2174 KB)
- Tuning in Amplifiers (PDF 44 KB)
- Op Amp Performance Analysis (PDF 76 KB)
- An Error Analysis of the ISO102 in a Small Signal Measuring Application (PDF 29 KB)
- Level Shifting Signals with Differential Amplifiers (PDF 23 KB)
- Operational Amplifier Macromodels: A Comparison (PDF 59 KB)
DRV8841 工具与软件
| 培训内容 | 型号 | 软件/工具类型 |
| DRV8841 评估模块 | DRV8841EVM | 开发电路板/EVM |
| 用于刷式和步进电机的 集成电机驱动器 | DRV8841-C2-KIT | 开发电路板/EVM |
