HMC860LP3E Quad Low Noise High PSRR Linear Voltage Regulator
The HMC860LP3E is a BiCMOS ultra low noise quad-output voltage regulator. It features a low noise band-gap reference externally decoupled for best in-close noise performance. High Power Supply Rejection Ratio (PSRR) in the 0.1 MHz to 10 MHz range provides excellent rejection of preceding switching regulator noise. The four voltage outputs are ideal for frequency generation subsystems including Hittite's broad line of PLLs with Integrated VCOs. Each output voltage can be adjusted higher or lower than the default value by using one external resistor. Each output can be set to 5V by grounding the corresponding HV pin. The regulator can be powered down by the TTL-compatible Enable input. The HMC860LP3E is housed in a 3x3mm QFN SMT package.
技术特性
- Ultra Low Noise:
3nV/√Hz at 10 kHz,
7nV/√Hz at 1 kHz
- High Power Supply Rejection
Ratio (PSRR)
80 dB at 1 kHz, 60 dB at 1 MHz
- Four Voltage Outputs:
VR1 @ 3V / 80 mA
VR2, VR3 @ 3V / 20 mA
VR4 @ 4.5V / 120 mA
- Adjustable Outputs: 2.5V to 5.2V
- Low Power-Down Current: <1 μA
- 16 Lead 3x3mm SMT Package: 9mm²
应用领域 APPLICATION
- Test Instrumentation
- Military Radios, Radar and ECM
- Basestation Infrastructure
- Ultra Low Noise
Frequency Generation
- Fractional-N Synthesizer Supply
- Mixed-Signal Circuit Supply
|
技术指标
| Input Volt. (V) |
Function |
Output Volt. (V) |
Output Current (mA) |
Power Supply Rej. Ratio (PSRR) (dB) |
Output Noise Spectral Density (nV/√Hz) |
Regulated Outputs |
Package |
| 3.35 - 5.6 |
Quad High PSRR |
2.5 - 5.2 |
20 - 120 |
80 @ 1 kHz,
60 @ 1 MHz |
7 @ 1 kHz,
3 @ 10 kHz |
4 |
LP3E |
订购信息 Ordering Information
功能框图 Functional Block Diagram
|
