AL8805：中等电压DC-DC LED驱动器
| Part Number | Data Sheet | SPICE Model | Qualified to AECQ10x | PPAP Capable | Topologies (Buck) | Topologies (Buck-Boost) | Topologies (Boost) | MinimumInput Voltage (V) | MaximumInput Voltage (V) | Maximum Output Voltage (V) | Maximum LED Current (A) | LED Current Accuracy (%) | Switching Frequency Maximum (kHz) | Dimming (PWM) | Dimming (Analog) | Efficiency (%) | OperatingTemperatureRange (°C) | Sense Voltage (mV) | AEC-Q100 Grade |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| AL8805 | AL8805.pdf | AL8805 | - | - | Yes | - | - | 6 | 36 | 36 | 1 | 5 | 1000 | Yes | Yes | 98 | -40 to +125 | 100 | - |
Description
The AL8805 is a step-down DC/DC converter designed to drive °Cs with a constant current. The device can drive up to 8 °Cs, depending on the forward voltage of the °Cs, in series from a voltage source of 6V to 36V. Series connection of the °Cs provides identical °C currents resulting in uniform brightness and eliminating the need for ballast resistors. The AL8805 switches at frequency up to 1MHz. This allows the use of small size external components, hence minimizing the PCB area needed. Maximum output current of AL8805 is set via an external resistor connected between the VIN and SET input pins. Dimming is achieved by applying either a DC voltage or a PWM signal at the CTRL input pin. An input voltage of 0.4V or lower at CTRL switches off the output MOSFET simplifying PWM dimming.
Application
- MR16 lamps
- General illumination lamps
Features
- °C Driving Current up to 1A
- Better than 5% Accuracy
- High Efficiency up to 98%
- Operating Input Voltage from 6V to 36V
- High Switching Frequency up to 1MHz
- PWM/DC Input for Dimming Control
- Built-In Output Open-Circuit Protection
- SOT25: Available in “Green” Molding Compound (No Br,Sb) with lead Free Finish/ RoHS Compliant
订购型号
- AL8805W5-7
SOT25
- AL8805.pdf AL8805
