MIC2085 _ BDTIC 中国领先电子元器件代理商

MIC2085

The MIC2085 and MIC2086 are single channel positive voltage hot swap controllers designed to allow the safe insertion of boards into live system backplanes. The MIC2085and MIC2086 are available in 16-pin and 20-pin QSOP packages, respectively. Using a few external components and by controlling the gate drive of an external N-Channel MOSFET device, the MIC2085/86 provide inrush current limiting and output voltage slew rate control in harsh, critical power supply environments. Additionally, a circuit breaker function will latch the output MOSFET off if the current limit threshold is exceeded for a programmed period of time. The devices’ array of features provide a simplified yet robust solution for many network applications in meeting the power supply regulation requirements and affords protection of critical downstream devices and components.

产品特性

MIC2085: Pin for pin functional equivalent to the LTC1642
2.3V to 16.5V supply voltage operation
Surge voltage protection to 33V
Operating temperature range -40°C to 85°C
Active current regulation limits inrush current independent of load capacitance
Programmable inrush current limiting
Analog foldback current limiting
Electronic circuit breaker
Dual-level overcurrent fault sensing
Fast response to short circuit conditions (<1µs)
Programmable output undervoltage detection
Undervoltage lockout protection
Power-on reset (MIC2085/86) and power-good (MIC2086) status outputs
/FAULT status output
Driver for SCR crowbar on overvoltageSingle Channel Hot Swap Controllers

技术参数

Parameter Name Value	Value
Product type Low Voltage (<16V)	Low Voltage (<16V)
Latch off Yes	Yes
FAULT Yes	Yes
POR Yes	Yes
Foldback Current Limit Yes	Yes
Θja (C/W) 112	112