• 简体中文
• English

M74HC4852：DUAL 4 Channel Analog Mux/Demux With Injection Current Protection

The M74HC4852 device is a dual four-channel analog multiplexer/demultiplexer manufactured with silicon gate C²MOS technology.

It features injection current effect control which makes the device particularly suited for use in automotive applications where voltages in excess of normal logic voltage are common. The injection current effect control allows signals at disabled input channels to exceed the supply voltage range or go down to ground without affecting the signal of the enabled analog channel.

This eliminates the need for external diode-resistor networks typically used to keep the analog channel signals within the supply voltage range.

Key Features

• Low power dissipation
  • ICC = 2 μA (max.) at TA = 25 °C
• Injection current protection: VΔ out < 1 mV at VCC = 5 V, IIN = 1 mA, RS = 3.9 kΩ
• “ON” resistance at TA = 25 °C
  • 215 Ω typ. (VCC = 3.0 V)
  • 160 Ω typ. (VCC = 4.5 V)
  • 150 Ω typ. (VCC = 6 V)
• Fast switching: tpd = 8.6 ns (typ.) at TA = 25 °C, VCC = 4.5 V
• Wide operating supply voltage range
  • VCC = 2 V to 6 V
• High noise immunity: VNIH = VNIL = 28% VCC (min.)
• Pin and function compatible with series 4052, 4852
• Latch-up performance exceeds 500 mA
  • (JESD 17)
• ESD performance
  • HBM: 2000 V
  • MM: 200 V
  • CDM: 1000 V

产品规格

简报

手册

样片和购买

质量和可靠性