SPBTLE-RF:Very low power module for Bluetooth Smart v4.1

The SPBTLE-RF is an easy to use Bluetooth® Smart master/slave network processor module, compliant with Bluetooth® v4.1. The SPBTLE-RF B-SmarT module supports multiple roles simultaneously, and can act at the same time as Bluetooth Smart sensor and hub device.

The entire Bluetooth Smart stack and protocols are embedded into SPBTLE-RF B-SmarT module. The external host application processor, where the application resides, is connected to the SPBTLE-RF B-SmarT module through a standard SPI interface.

The SPBTLE-RF B-SmarT module provides a complete RF platform in a tiny form factor. Radio, antenna, high frequency and LPO oscillators are integrated to offer a certified solution to optimize the time to market of the final applications.

The SPBTLE-RF can be powered directly with a standard 3 V coin cell battery, a pair of AAA batteries or any power source from 1.7 to 3.6 V.

Key Features

  • Bluetooth v4.1 compliant
    • Supports master and slave modes
    • Multiple roles supported simultaneously
  • Embedded Bluetooth low energy protocol stack
    • GAP, GATT, SM, L2CAP, LL, RFPHY
  • Bluetooth low energy profiles provided separately
  • Bluetooth radio performance:
    • Embedded ST BlueNRG-MS
    • Tx power: + 4 dBm
    • Rx sensitivity: - 88 dBm
    • Provides up to 92 dB link budget with excellent link reliability
  • Host interface
    • SPI, IRQ, and RESET
    • On-field stack upgrading available via SPI
  • AES security co-processor
  • Certification
    • CE qualified
    • FCC, IC modular approval certified
    • BQE qualified
  • On-board chip antenna
  • Operating supply voltage: from 1.7 to 3.6 V
  • Operating temperature range: -40 °C to 85 °C
产品规格
DescriptionVersionSize
DS11045: Very low power module for Bluetooth® Smart v4.16.0641 KB
Design Notes & Tips
DescriptionVersionSize
DT0069: Enabling the Bluetooth Low Energy Direct Test Mode (DTM) with BlueNRG-MS1.0248 KB
DT0068: How to replace a low-speed wired connection using a BLE link1.1222 KB
DT0070: How to set the Bluetooth device address on BlueNRG-MS1.0195 KB
DT0051: Quick guide on BLE RF technology: products, evaluation kits and software packages1.2174 KB
简报
DescriptionVersionSize
SPBTLE-RF Firmware Upgrade Options818 KB
STM32 Open Development Environment
型号制造商Description
X-NUCLEO-IDB05A1STBluetooth Low Energy expansion board based on SPBTLE-RF module for STM32 Nucleo
MCUs Embedded Software
型号制造商Description
X-CUBE-BLE1STBluetooth Low Energy software expansion for STM32Cube
解决方案评估工具
型号制造商Description
STEVAL-IDB006V1MSTBluetooth® Low Energy USB dongle based on the SPBTLE-RF module
样片和购买
型号PackagePacking TypeOperating Temperature (°C) (min)Operating Temperature (°C) (max)Unit Price (US$) *QuantityECCN (EU)ECCN (US)Country of Origin
SPBTLE-RFRF MODULETray-4085--5A002A1A5A992CITALY
质量和可靠性
型号PackageGradeRoHS Compliance GradeMaterial Declaration**
SPBTLE-RFRF MODULEIndustrialEcopack2md_bc-wspc-ssyst.-wspc-bluetooth-wspc-module_hbbcbt2c152.pdf
md_bc-wspc-ssyst.-wspc-bluetooth-wspc-module_hbbcbt2c152.xml
Very low power module for Bluetooth® Smart v4.1 SPBTLE-RF
Enabling the Bluetooth Low Energy Direct Test Mode (DTM) with BlueNRG-MS SPBT3-0DP2
How to replace a low-speed wired connection using a BLE link SPBTLE-RF
How to set the Bluetooth device address on BlueNRG-MS SPBT3-0DP2
Quick guide on BLE RF technology: products, evaluation kits and software packages X-NUCLEO-IDB04A1
Quick guide on BLE RF technology: products, evaluation kits and software packages SPBTLE-RF
md_bc-wspc-ssyst.-wspc-bluetooth-wspc-module_hbbcbt2c152.pdf SPBTLE-RF
md_bc-wspc-ssyst.-wspc-bluetooth-wspc-module_hbbcbt2c152.xml SPBTLE-RF