STM1816:Low Power Reset Circuit

STM181x devices are low power reset devices used to monitor power supplies for microcontrollers. They perform a single function: asserting a reset signal whenever VCCsupply voltage drops below a preset value and keeping it asserted until VCChas risen above the preset threshold for a minimum period of time (trec). They provide excellent circuit reliability without additional external components when used with +3.0 V / +3.3 V (STM1815–STM1818), and +5 V (STM1810–STM1813) power supply systems.

A precision voltage reference and comparator monitors the VCCinput for an out-of-tolerance condition. When an invalid VCCcondition occurs, the reset output (RST) is forced low (or high in the case of RST) and remains asserted for trecafter VCCrises above the reset threshold. The STM1813/1818 also keep reset asserted for trecafter the output is momentarily pulled to ground by an external push-button switch.

The STM1812 and STM1817 have an active-high, push-pull output. The STM1810 and STM1815 (push-pull) and STM1811, STM1813, STM1816, and STM1818 (open-drain) have an active-low RSToutput. The open-drain devices (STM1811 / STM1813 / STM1816 / STM1818) also have an internal pull-up resistor to VCC. The STM1813 and STM1818 feature a debounced manual reset feature that asserts a reset if the RSTpin is pulled low for more than 1.5 μs. When used to initiate manual reset, RSTdebounces signals from devices such as mechanical switches. For devices with this feature, the release of the external switch triggers the reset period.

The STM181x devices are guaranteed to output the correct logic state for VCCdown to 1.0 V (0 °C to +105 °C). They also provide a reset comparator designed to ignore fast transients on VCC.

Reset thresholds are available between +2.55 V and +4.62 V. These small, low power devices are ideal for use in portable equipment. All are available in the space-saving 3-pin SOT23 package, and are specified from –40 °C to +105 °C.

Key Features

  • Precision monitoring of 3 V, 3.3 V, and 5 V supply voltages
  • Four output configurations:
    • Push-pull, active-high (STM1812,1817)
    • Push-pull, active-low (STM1810,1815)
    • Open-drain, active-low (STM1811,1816)
    • Open-drain, active-low with push-button detect (STM1813,1818)
  • Reset pulse width - 100 ms (min.)
  • Low supply current - 4 μA (typ.)
  • Guaranteed assertion down to VCC = 1.0 V (0 °C to 105 °C)
  • Factory-trimmed reset thresholds of 2.55 V, 2.88 V, 3.06 V, 4.37 V, and 4.62 V (typ.)
  • Power supply transient immunity
  • Push-button/manual reset detect (STM1813/1818)
  • Operating temperature: –40 °C to 105 °C
  • ± 2.5% reset threshold accuracy:(–40 °C to 105 °C)
  • Available in the SOT23-3 package
  • Fully compatible with DS181x and MXD181x products.
产品规格
DescriptionVersionSize
DS4340: Low power reset circuit8.1313 KB
应用手册
DescriptionVersionSize
AN1790: How to connect ST reset circuits to a microprocessor1.484 KB
Technical Notes & Articles
DescriptionVersionSize
TN0941: Reset and supervisor ICs: frequently asked questions (FAQ)1.0328 KB
宣传册
DescriptionVersionSize
Resets and supervisors - portfolio overview1.01 MB
样片和购买
型号PackagePacking TypeVoltage Reset 1 (V) (typ)Voltage Reset 2 (V) (typ)Operating Temperature (°C) (min)Operating Temperature (°C) (max)Unit Price (US$) *QuantityECCN (EU)ECCN (US)Country of Origin
STM1816SWX7FSOT23Tape And Reel2.88--401050.351000NECEAR99MALAYSIA
STM1816RWX7FSOT23Tape And Reel2.55--401050.351000NECEAR99MALAYSIA
STM1816TWX7FSOT23Tape And Reel3.06--401050.351000NECEAR99PHILIPPINES
质量和可靠性
型号PackageGradeRoHS Compliance GradeMaterial Declaration**
STM1816SWX7FSOT23IndustrialEcopack3md_wx-wspc-sot-wspc-23-wspc-3-wspc-lds_dzwx96va1sc-wspc-(stm1816swx7f).pdf
md_wx-wspc-sot-wspc-23-wspc-3-wspc-lds_dzwx96va1sc-wspc-(stm1816swx7f).xml
STM1816RWX7FSOT23IndustrialEcopack3md_wx-wspc-sot-wspc-23-wspc-3-wspc-lds_dzwx96va1rc-wspc-(stm1816rwx7f)_wpc_ver2_signed.pdf
md_wx-wspc-sot-wspc-23-wspc-3-wspc-lds_dzwx96va1rc-wspc-(stm1816rwx7f)_wpc_ver2.xml
STM1816TWX7FSOT23IndustrialEcopack3md_sot-wspc-23-wspc-3-wspc-lds_dzwx-wspc-96va1tc_vers2_signed.pdf
md_sot-wspc-23-wspc-3-wspc-lds_dzwx-wspc-96va1tc_vers2.xml
Low power reset circuit STM1811
How to connect ST reset circuits to a microprocessor STM812
Reset and supervisor ICs: frequently asked questions (FAQ) STM805T-S-R
Reset and supervisor ICs: frequently asked questions (FAQ) STM805T-S-R
md_wx-wspc-sot-wspc-23-wspc-3-wspc-lds_dzwx96va1sc-wspc-(stm1816swx7f).pdf STM1816
md_wx-wspc-sot-wspc-23-wspc-3-wspc-lds_dzwx96va1sc-wspc-(stm1816swx7f).xml STM1816
md_wx-wspc-sot-wspc-23-wspc-3-wspc-lds_dzwx96va1rc-wspc-(stm1816rwx7f)_wpc_ver2_signed.pdf STM1816
md_wx-wspc-sot-wspc-23-wspc-3-wspc-lds_dzwx96va1rc-wspc-(stm1816rwx7f)_wpc_ver2.xml STM1816
md_sot-wspc-23-wspc-3-wspc-lds_dzwx-wspc-96va1tc_vers2_signed.pdf STM1816
md_sot-wspc-23-wspc-3-wspc-lds_dzwx-wspc-96va1tc_vers2.xml STM1816