LTC2377-18 - 18-Bit, 500ksps, Low Power SAR ADC with 102dB SNR

The LTC®2377-18 is a low noise, low power, high speed 18-bit successive approximation register (SAR) ADC. Operating from a 2.5V supply, the LTC2377-18 has a ±VREF fully differential input range with VREF ranging from 2.5V to 5.1V. The LTC2377-18 consumes only 6.8mW and achieves ±1.75LSB INL maximum, no missing codes at 18 bits with 102dB SNR.

The LTC2377-18 has a high speed SPI-compatible serial interface that supports 1.8V, 2.5V, 3.3V and 5V logic while also featuring a daisy-chain mode. The fast 500ksps throughput with no cycle latency makes the LTC2377-18 ideally suited for a wide variety of high speed applications. An internal oscillator sets the conversion time, easing external timing considerations. The LTC2377-18 automatically powers down between conversions, leading to reduced power dissipation that scales with the sampling rate.

The LTC2377-18 features a unique digital gain compression (DGC) function, which eliminates the driver amplifier’s negative supply while preserving the full resolution of the ADC. When enabled, the ADC performs a digital scaling function that maps zero-scale code from 0V to 0.1 • VREF and full-scale code from VREF to 0.9 • VREF. For a typical reference voltage of 5V, the full-scale input range is now 0.5V to 4.5V, which provides adequate headroom for powering the driving amplifier from a single 5.5V supply.

Features
  • 500ksps Throughput Rate
  • ±1.75LSB INL (Max)
  • Guaranteed 18-Bit No Missing Codes
  • Low Power: 6.8mW at 500ksps, 6.8μW at 500sps
  • 102dB SNR (Typ) at fIN = 2kHz
  • –124dB THD (Typ) at fIN = 2kHz
  • Digital Gain Compression (DGC)
  • Guaranteed Operation to 125°C
  • 2.5V Supply
  • Fully Differential Input Range ±VREF
  • VREF Input Range from 2.5V to 5.1V
  • No Pipeline Delay, No Cycle Latency
  • 1.8V to 5V I/O Voltages
  • SPI-Compatible Serial I/O with Daisy-Chain Mode
  • Internal Conversion Clock
  • 16-Lead MSOP and 4mm × 3mm DFN Packages
Typical Application
LTC2377-18 Typical Application
LTC2377-18 Typical Application
Applications
  • Medical Imaging
  • High Speed Data Acquisition
  • Portable or Compact Instrumentation
  • Industrial Process Control
  • Low Power Battery-Operated Instrumentation
  • ATE
Packaging
LTC2377-18 Package Drawing
LTC2377-18 Package Drawing
Order Information
Part NumberPackageTempPrice(1-99)Price (1k)*
LTC2377CDE-18#PBF4x3 DFN-16C$27.86$19.50
LTC2377CDE-18#TRPBF4x3 DFN-16C$19.56
LTC2377CMS-18#PBFMS-16C$27.86$19.50
LTC2377CMS-18#TRPBFMS-16C$19.56
LTC2377HMS-18#PBFMS-16H$36.84$25.79
LTC2377HMS-18#TRPBFMS-16H$25.85
LTC2377IDE-18#PBF4x3 DFN-16I$32.04$22.43
LTC2377IDE-18#TRPBF4x3 DFN-16I$22.49
LTC2377IMS-18#PBFMS-16I$32.04$22.43
LTC2377IMS-18#TRPBFMS-16I$22.49
Demo Boards
Part NumberDescriptionPrice
DC1783A-GLTC2377-18 with LTC6655-5/LT6350 Demo Board | 18-Bit, 500ksps, SAR ADC with 102dB SNR. Req DC718 or DC2026$150.00
DC1805A-GLTC6362 with 500ksps 18-bit LTC2377-18 Demo Board | SAR ADC, LTC6655-5. Req DC718 or DC2026$150.00
Companion Boards
Part NumberDescriptionPrice
DC1075AClock Divider board$50.00
DC2026CLinduino One Isolated USB Demo Board: An Arduino- and QuikEval-Compatible Code Development Platform$75.00
DC718CUSB Data Acquisition Controller, for PScope Evaluation Kits (<135Mbps)$300.00
Datasheet
Reliability Data
Product Selector Card
Software and Simulation
CAD Symbol
Linduino
Related Products
LTC2377-18 - 18-Bit, 500ksps, Low Power SAR ADC with 102dB SNR
R549 - Reliability Data
18-Bit 1.6Msps SAR ADC 101dB SNR
LTC2378-20 - 20-Bit 1Msps SAR ADC 0.5ppm INL
Precision Signal Chain Products Selector Guide
SAR ADC Drivers
SAR ADC Input Types
DC1783A_REVB FPGA/CPLD Source Code
LTC2380 IBIS MODEL
LTC2377-18 Footprints and Symbols
LTC2370 - DC1783A Linduino .INO File
LTC2378 - DC1925A Linduino .INO File
LTC237X Linduino .CPP FIle
LTC237X Linduino Header File