RH1028M - Radiation Hardened Ultralow Noise Precision High Speed Op Amps

The RH1028 (gain of -1 stable) /RH1128 (gain of +1 stable) achieve a new standard of excellence in noise performance with 0.9nV/√Hz 1kHz noise, 1.0nV/√Hz 10Hz noise. This ultralow noise is combined with excellent high speed specifications (gain-bandwidth product is 75MHz for RH1028, 20MHz for RH1128), distortion-free output, and true precision parameters (0.25μV/°C drift, 20μV offset voltage, 25 million voltage gain). Although the RH1028/RH1128 input stage operates at nearly 1mA of collector current to achieve low voltage noise, input bias current is only 50nA. The RH1028/RH1128’s voltage noise is less than the noise of a 50Ω resistor. Therefore, even in very low source impedance transducer or audio amplifier applications, the RH1028/RH1128’s contribution to total system noise will be negligible.

Features
  • Voltage Noise 1.6nV/rt Hz Max. at 1kHz 0.9nV/rt Hz Typ. at 1kHz 4.7nV/ rtHz Typ. at 10Hz
  • Gain-Bandwidth Product RH1028: 50MHz Min. RH1128: 11MHz Min.
  • Slew Rate RH1028: 11V/µs Min. RH1128: 4.5V/µs Min.
  • Offset Voltage: 80µV Max.
  • Drift with Temperature: 1.0µV/°C Max.
  • Voltage Gain: 5 Million Min.
  • Total Ionizing Dose (TID) Tolerance, per TM1019.8, MIL-STD-883:- 200kRad (Si), per condition A at 50Rads(Si)/sec
Typical Application
RH1028M Typical Application
Applications
  • Low Noise Frequency Synthesizers
  • Infrared Detectors
  • Accelerometer and Gyro Amplifiers
  • 350Ω Bridge Signal Conditioning
Packaging
RH1028M Package Drawing
Datasheet
Controlled Drawings
Application Note
Radiation Report
Related Products
RH1028M/RH1128M - DICE SPECIFICATION
RH1028M/RH1128M - Ultralow Noise Precision High Speed Op Amps
RH1028/RH1128 DICE - SPEC NO. 05-08-5238
RH1028M - SPEC NO. 05-08-5217
RH1128M - SPEC NO. 05-08-5218
AN141 - Risk Assessment Advice for High Reliability Amplifiers
DDD_RH1028MW_Fab Lot W1117814.1 W2
ELDRS HDR_RH1028MW_Fab Lot W1117814.1 W5
ELDRS LDR_RH1028MW_Fab Lot W1117814.1 W5