DS1085:EconOscillator Frequency Synthesizer

The DS1085 is a dual-output frequency synthesizer requiring no external timing components for operation. It can be used as a standalone oscillator or as a dynamically programmed, processor-controlled peripheral device. An internal master oscillator can be programmed from 66MHz to 133MHz with three resolution options of 10kHz, 25kHz, and 50kHz. A programmable, 3-bit prescaler (divide-by-1, 2, 4, or 8) permits the generation of a reference oscillator output (OUT0) from the master, ranging from 8.2MHz to 133MHz. A second independent prescaler and a 1-to-1025 divider allows the generation of a main oscillator output (OUT1) from 8.1kHz to 133MHz. The two outputs, although synchronous with the master, can be independently programmed. The combination of programmable master oscillator, prescalers, and dividers allows the generation of thousands of user-specified frequencies. All master oscillator, prescaler, and divider settings are stored in NV (EEPROM) memory, providing a default value on power-up that allows it to be used as a standalone oscillator. A 2-wire serial interface allows in-circuit, on-the-fly programming of the master oscillator, prescalers (P0 and P1), and divider (N). This allows dynamic frequency modification, if required, or, for fixed-frequency applications, the DS1085 can be used with factory- or user-programmed values.

Key Features
  • User-Programmable Frequency Synthesizer
  • Programmable From 8.1kHz to 133MHz
  • Dual Synchronous Outputs
  • 8.2MHz to 133MHz Reference Oscillator Output
  • 8.1kHz to 133MHz Main Oscillator Output
  • Three Resolution Options
  • 2-Wire Serial Interface
  • 0.75% Absolute Accuracy
  • Nonvolatile (NV) Frequency Settings
  • Single 5V Supply
  • No External Timing Components
  • Power-Down Mode
DS1085: Block Diagram
DS1085: Block Diagram
Applications/Uses
  • Cable Modems
  • Cell Phones
  • Computer Peripherals
  • Copiers
  • PCs
  • Printers
DataSheet
titleDownload file
DS1085 Data SheetDS1085.pdf
Parametrics
Part NumberfOUT
(MHz)
fOUT
(kHz)
ΔfOUT
(%)
User Prog. fOUTSpread SpectrumVCC
(V)
Reset OutOper. Temp.
(°C)
Package/PinsBudgetary
Price
maxminmaxSee Notes
DS10851338.1±1 (0 to 70°C)I2CNo4.75 to 5.25No0 to +70SOIC(N)/8$4.84 @1k
Quality and Environmental Data
Related Products
  • DS1077L:3V EconOscillator/Divider
  • DS1077:EconOscillator™/Divider
  • DS1085L:3.3V EconOscillator Frequency Synthesizer
  • DS1073:3-Volt EconOscillator/Divider
  • DS1075:EconOscillator/Divider
Ordering Information
Part NumberStatusRecommended ReplacementPackageTempRoHS
DS1085Z-10No Longer AvailableDS1085Z-10+SOIC(N),;8 pin;30.9 mm²0°C to +70°CNo
DS1085Z-10+ActiveSOIC(N),;8 pin;30.9 mm²0°C to +70°CLead Free
DS1085Z-25No Longer AvailableDS1085Z-25+SOIC(N),;8 pin;30.9 mm²0°C to +70°CNo
DS1085Z-25+ActiveSOIC(N),;8 pin;30.9 mm²0°C to +70°CLead Free
DS1085Z-50No Longer AvailableDS1085Z-50+SOIC(N),;8 pin;30.9 mm²0°C to +70°CNo
DS1085Z-50+ActiveSOIC(N),;8 pin;30.9 mm²0°C to +70°CLead Free
DS1085.pdf DS1085
DS1085.pdf DS1085
DS1085.pdf DS1085
Reduce the Chances of Human Error: Part 2, Super Amps and Filters for Analog Interface MAX5492
Adding Windows NT/2000/XP Support to the AN3315 Parallel-Port 2-Wire Software DS3904
Writing Parallel-Port 2-Wire Software in C DS3904
Decoupling Requirements for the DS1077/DS1085 EconOscillators DS1135L
A Programmatic Approach to Calculating DS1085 Programmable-Oscillator Register Values DS1085
Frequency Calculator for the DS1085/DS1085L EconOscillator DS1085L
DS1085.pdf DS1085
DS1085.pdf DS1085