• 简体中文
• English

DS1086LPMB1：DS1086LPMB1 Peripheral Module

The DS1086LPMB1 peripheral module provides the necessary hardware to interface the DS1086L 3.3V spread-spectrum EconOscillator™ to any system that utilizes Pmod™-compatible expansion ports configurable for I²C communication. The DS1086L is a programmable clock generator that produces a spread-spectrum (dithered) square-wave output of frequencies from 130kHz to 66.6MHz. The selectable dithered output reduces radiated-emission peaks by dithering the frequency 0.5%, 1%, 2%, 4%, or 8% below the programmed frequency. The DS1086L has a power-down mode and an output-enable control for power-sensitive applications. Refer to the DS1086L IC data sheet for detailed information regarding operation of the IC.

Key Features User-Programmable 130kHz to 66.6MHz Square Wave No External Timing Components Required 6-Pin Pmod-Compatible Connector (I²C) Example Software Written in C for Portability Secondary Header Allows Daisy-Chaining of Additional Modules on the I²C Bus Output Header Provides Access to Control Signals for External Circuitry RoHS Compliant Proven PCB Layout Fully Assembled and Tested

DS1086LPMB1 Board Photo Applications/Uses Industrial PCs and Printers Portable Electronics

DataSheet

Parametrics

Ordering Information