• 简体中文
• English

DS3660：DeepCover Security Manager for Low-Voltage Operation with 1KB Secure Memory and Programmable Tamper Hierarchy

Advanced Physical Security Provides Two Levels of Tamper-Detection Hierarchy at Low Power

DeepCover® embedded security solutions cloak sensitive data under multiple layers of advanced physical security to provide the most secure key storage possible. The DeepCover Security Manager (DS3660) is a security manager with 1024 bytes of SRAM for the secure storage of sensitive data and the physical tamper-sensing response functions required in cryptographic processors and data security equipment. The low-voltage operation allows the host microprocessor interface and optional external memory to run at a low voltage (1.8V typical). One of the DS3660's primary features is the on-chip nonimprinting memory, consisting of eight 128-byte banks incorporating a high-speed, direct-wired clearing function. The 1KB memory is constantly complemented in the background to prevent memory imprinting of data. The DS3660 architecture allows the user to clear selective banks of the memory based upon specified tamper events. In the event of a qualified tamper event, the desired bank(s) of memory are rapidly cleared and a negative bias can be applied to erase external memory. The DS3660 includes a seconds counter, watchdog timer, CPU supervisor, nonvolatile (NV) SRAM controller, and on-chip temperature sensor. In the event of a primary power failure, an external battery source is automatically switched in to keep the memory, time, and tamper-detection circuitry active. Optionally, an internal 1.8V bias source can be selected to keep a low-voltage SRAM alive. The DS3660 is configurable to operate with a low-voltage mobile host microprocessor interface for embedded battery-operated devices. The DS3660 provides low-leakage tamper-detection inputs for interface to external sensors, interlocks, and antitamper meshes. The DS3660 also invokes a tamper event on absolute temperature, if the temperature rate-of-change (ROC) exceeds programmed limits, or if the crystal oscillator frequency falls outside a specified window. The tamper event is latched and timestamped for fault-recovery purposes. Access to the timer, tamper monitoring, nonimprinting memory, and device configuration is conducted through an I²C-compatible interface. The DS3660 is assembled in a Pb-free, 7mm x 7mm x 0.8mm CSBGA package.

Parametrics

Quality and Environmental Data

• DS3660.pdf

Ordering Information